Router acts as a TCP server. After starting the server, the TCP client can connect
to the router, and the TCP client can send commands to get the data of the
RS485 terminals.
If it is in a local area network environment, fill in the address information of the
router gateway IP. If it is in a wide area network environment, the router needs
to have a public IP, and the address information should fill in the public IP.
UDP
If it is in a local area network environment, fill in the address information of the
router gateway IP. If it is in a wide area network environment, the router needs
to have a public IP, and the address information should fill in the public IP.
To Next Page
Loading...
Need help?
General
