WinSCP or SSH into your the WireGuard Server (router) find and modify the file
/etc/config/wireguard_server
Add a line to the end of the config file of clients you want to visit.
list subnet '192.168.xxx.0/24'
Save and Exit
7.3. VPN Policies
Starting from firmware version 3.022, users can define VPN routing policies. For
example, it is possible to use VPN for a specific website/IP while maintaining a
normal Internet traffic without VPN for others.
7.3.1. Settings
Enable VPN Policy: Turn on/off VPN policies.
Use VPN for guest network: Turn on/off use VPN for guest network.
To Next Page
Loading...
Need help?
General
