5.3 Warning messages
All notices, warnings and errors will be displayd on message screen to provide operator information regarding
current system status.
1
2
Message box
- message text is indicated by red text
Accept button
- button for confirming alarm
Message screen
1
Note!
Given the importance of the event the message screen can:
- disappear automatically
- require confirmation by ACCEPT button - F tap quits the irst
buzzer. Second tap removes the message screen (If there is
no acctivity for 10 seconds message will disappear).
2
- LOADING FILES...
This message is displayed during equipment turning on process. If it is
found that some file is missing or corrupted, the user will be directed to start
configuration mode.
- TESTING...
This message is displayed during communication testing during equipment
turning on process.
- NEW FIRST NAVIGATION LIGHTS* MODULE IS DETECTED
* or some other module
This message appears in case when main unit during equipment turning on
process detects input module which is not registered yet, or module which
was registered before, but was unregistered because of "not responds"
error.
Note!
Main unit stores data which input modules are connected to it. Data file with connected input modules is called
register and process of adding modules to data file is called registration.
During system boot up process main unit searches for input modules. Each input module replys and main unit
compares replys with previous register. In case of new module is detected it will be registred. In case that
module does not respond it will be unregistered. This feature makes reconfiguration very easy.
28
To Next Page
Loading...
Need help?
General
