Glamox ITNSL-01T User Manual

Touch Screen Navigational Light Controller
NL90
Rev.: 1, Print date: 2016-06-17
User manual

Glamox ITNSL-01T Specifications

General

Brand	Glamox
Model	ITNSL-01T
Category	Controller
Language	English

Summary

1. Overview

1.1 Description

Detailed description of the NL90 Touch Screen Navigational Light Controller's features and capabilities.

1.2 Design

Overview of the main unit's components and physical design features.

1.3 Package contents

List of all components included in the product package for the user.

1.3 Build up procedure

Step-by-step guide for assembling and setting up the navigation lights controller.

2. Safety instructions

3. Installation

3.1 Installation requirements

Prerequisites and guidelines for preparing the installation site and environment.

3.1.1 Arrangement

Guidelines for arranging navigation and signal lights according to project drawings.

3.1.2 Connection

Detailed wiring diagram and instructions for connecting system modules.

3.1.3 Factory configuration/connection

Information on pre-configured settings and initial module interconnections.

3.2 Preparations

Steps for checking package contents, handling damaged parts, and selecting mounting positions.

3.3 Mounting

3.3.1 Mounting of main unit

Specific steps for mounting the central control unit.

3.3.2 Mounting of power supply and input modules

Procedures for installing power and input modules.

3.4 Connecting

3.4.1 Connecting the protective earth

Procedures for establishing proper grounding for safety and reliability.

3.4.2 Interconnecting modules

How to connect the main unit, power supply, and input modules using provided cables.

3.4.3 Connecting lights circuits

Guide for wiring the navigation and signal lights to the input modules.

3.4.4 Connecting power supply

Steps to connect the main and spare power supplies to the system.

3.4.5 Connecting input/output contacts and NMEAcommunication

How to connect external alarms, inputs, and NMEA devices.

3.4.4 NMEA communication protocol

Details the NMEA 0183 sentences for alarm status and acknowledgement.

3.4.4 Powering up

Instructions for the initial system power-on sequence and checks.

4. Configuration

4.1 Standard configuration

Default settings provided with the unit for initial setup.

4.2 Enter configuration mode

Steps to access and navigate the system's configuration interface.

4.3 Navigation lights configuration mode

How to configure individual navigation lights, their properties, and grouping.

4.4 Signal lights configuration mode

How to configure individual signal lights, their properties, and grouping.

5. Operating instructions

5.1 Normal operation mode

How to use the system for daily monitoring and control of lights.

5.2 Manual operation mode

5.3 Warning messages

6. Commissioning

6.1 Commissioning procedure

Step-by-step guide for testing and validating the system's functionality.

6.2 Configuration setup form

Template for documenting the final system configuration for backup.

7. Technical characteristics

7.1 Unit outlines

Physical dimensions and outline drawings of the system components.

8. Troubleshooting

9. APPENDIX

Project information form

Form for recording project-specific details and sending to the manufacturer.