EasyManuals Logo

Glentronics PRO Series Instruction Manual

Glentronics PRO Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
The fluid in the battery is low. Add distilled water.
The battery terminals are corroded or the battery is defective.
Clean the terminals or replace the battery.
The unit is not receiving AC power. Check the plug or circuit breaker.
To silence the alarm during emergencies, press the button for 5 seconds.
The pump is defective or not connected. Check plug or replace pump.
The pump was activated. Check the main pump for failure.
To silence the alarm during emergencies, press the button for 5 seconds.
100%
75%
50%
25%
Battery power level
Warning alarms
Push button 1 second to test or reset alarm.
Push 5 seconds to silence alarm for 24 hours.
Battery Backup
Sump Pump System
Instruction
Manual

Other manuals for Glentronics PRO Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Glentronics PRO Series and is the answer not in the manual?

Glentronics PRO Series Specifications

General IconGeneral
BrandGlentronics
ModelPRO Series
CategoryWater Pump
LanguageEnglish

Related product manuals