29
# 9 - IMPROPER
TECHNIQUES
When shooting with the Glidecam 2000
Pro do not grab the CENTRAL POST
as in Photo # 60, for this defeats the
purpose and the isolation that the three
axis gimbal provides. Instead handle
your Glidecam 2000 Pro as shown in
Photo # 51 and # 52.
Do not allow the Handle of the Glidecam
2000 Pro to come in contact with the
BOTTOM PLATE as in Photo # 61. If
the Handle comes into contact with the
BOTTOM PLATE it will limit your range
of motion, and will result in “jerky”, and
unpleasant footage. Instead position the
Handle as shown in Photo # 50.
60
61
To Next Page
Loading...