USER’S MANUAL
SYSTEM/VECTOR
CHAPTER 4
4. TRANSPORT AND UNPACKING
4.1. TRANSPORT DATA TABLE
WEIGHT [kg]
POS. CODE DESCRIPTION OF PACKAGE Qty
NET GROSS
01 E428 VECTOR CRATE 1 330 400
02 G101 SYSTEM PALLET 1
All packages and packaging must be loaded, unloaded, and handled using
appropriate procedures and equipment as outlined in current Safety
standards.
The personnel performing these operations must wear the necessary
personal protective equipment.
Globaljig International S.r.l. declines any responsibility for injury and/or
damage caused by neglecting to take suitable precautions and by non-
compliance with the procedures and standards regarding transport.
4.2. CHECKING THE PACKAGE
When checking the goods delivered, be sure that:
The package is not dented or broken and shows no signs of dampness or
water. This must be done in the presence of the person making the delivery.
Take a good look at the package since the Manufacturer cannot be
held responsible for any damage to the equipment derived from
shipping.
Globaljig International S.r.l. guarantees the suitability of the materials used
in its packaging and the best procedure for setting the goods in these
packages.
Depending on the supply conditions, the goods always travel at the
customer’s risk unless otherwise agreed upon at the order confirmation
stage.
To Next Page
Loading...
