PACKAGE CONTENTS
ND-100S Main Unit
USB Cable
CD-ROM (User
Guide, Driver, etc)
Quick Start Guide
Note:
If any item is found to be damaged or missing, please contact your local retailer for assistance.
SYSTEM REQUIREMENTS
The ND-100S requires the minimum to run on a laptop:
Operating System: Windows 2000 / XP / Vista / Windows7
CPU: 500 MHz, Pentium III
System Memory (RAM): 128MB RAM
Hard Disk: 50MB free space
Display: 1024x768, "16-bit High Color" screen
WELCOME
Thank you for your purchase of the GlobalSat ND-100S USB Dongle GPS Receiver. The ND-
100S is a compact and portable device, which allows you to carry a GPS receiver for use on your
laptop whenever you travel. The ND-100S requires no battery or cables, only your favorite NMEA
compliant navigation software is all that’s needed to turn a laptop into a powerful navigation
system.
Works with Windows, Mac and Linux O/S notebooks and laptops. If you need navigation software,
you can check-out www.usglobalsat.com
under the Navigation Software section for
recommendations.
1. GETTING STARTED
There are only a few simple steps that you need to follow before using your ND-100S:
To Next Page
Loading...
