Globalsat ND-100S - Starting ND-100 S with AP

SETUP
Show the ND-100S Setting in NB COM PORT.
Terminal
Show the ND-100S receiving NMEA DATA.
★Note: If the notebook is not connected with internet, ND-100S AP’s MAP can not to show.
Starting using the ND-100S with AP
In the SETUP PAGE, click
,ND-100S AP will automatically set the com
port of ND-100S, Baud Rate is set 4800, click
and then click
,the icon will become ,ND-100S begins working.
Click , ND-100S AP will
to show ND-100S receiving NMEA
DATA.
In positioning process, ND-100S
indicates the receipt of satellite
intensity and distribution.
NO Fixed