Globalsat TR-151 - Connecting and Placing the TR-151 Battery

Page 11 of 18
4. Device Operation (Continued)
 Connect the battery connector into the 3 pin white socket. As illustrated below, red wire
orientation must be positioned next to the outer enclosure rim.
 Place battery wires under the battery, then, gently position the physical battery into the
compartment.
Note: After installing the battery, the status LED will emit red light. After the LED go out, please
wait for 5 seconds before turning on the power.
Note: Please take out the battery if you do not use TR-151 for a long time.