Globalstar ST150 - Ordering Information;Device Markings;Activation Information; Device Marking; Box Labels; Figure 14 - Pcb Label

9150-0125-01 R-4
ST150M User Manual
Confidential & Proprietary Information
64
11 ORDERING INFORMATION/DEVICE MARKINGS/ACTIVATION INFORMATION
11.1 DEVICE MARKING
The ST150 Module is marked with a PCB label as shown in the following figure:
FIGURE 1 4 – PCB LABEL
1. 12 Digit UID. 12
th
digit is a Luhn checksum of the previous 11 digits used to prevent incorrect data entry
during activation/device management
2. Hardware SKU – Used by Globalstar to identify different base hardware configurations
3. Product SKU – Used by Globalstar to identify different products using a specific Hardware SKU as the
base module
4. Globalstar Part Number
5. Scannable DataMatrix Code – Contains product information in the format <UID>,<Hardware SKU
ID>,<Hardware SKU Sring ID>,<Product SKU ID>,<Product SKU String ID>,<Globalstar Part Number>
11.2 BOX LABELS
The following Figures show the box labels and packing slips used for the ST150 Module:
FIGURE 1 5 – BOX LABEL AND PACKING SLIP
5
1
2
3
4
5