Globe SP10 - Important Points; Installation, Operation, and Maintenance Guidelines; Recommended Maintenance Schedule

Page15
YournewGlobemixerwillprovideyearsofuninterruptedservice,butonlyifyoudothefollowing:
Installation
• Donotuseanextensioncordtoconnectelectricalpower.
• Makesureall3Phaseunits(seedataplate)runinthedirectionofthearrowonfrontofthemachine.
Operation
• Turnoffthemixerpriortochangingspeeds.
• Followthecapacitychartonpage16,especiallyformixingdough.
• Useonlyrst(1)speedformixingdough.2ndspeedshouldneverbeusedon50%ARorlowerwiththe
 exceptionoftheSP60.TheSP60requiresa50%reductioninbatchsizetomixinspeed2with50%AR
 dough.
• Iftheunitshutsoffduringmixing(overloadprotectiontrips),reducethebatchsize.
Maintenance
• Addonly2pumpsofgreasetotheplanetarygreasettingonceayear.
Important Points
Recommended Maintenance
PART REQUIRED ACTION FREQUENCY
PlanetaryRing Reapplygrease(e.g.blackaxlegrease).  Onceayear.
 Injectgrease(2pumpsonly)intozerktting
 onthesideofplanetary.DONOToverll!
BowlSlideRods ApplyGlobeoil(mineraloil)onthebowlsliderods. Ifthebowlbecomesdifcultto
 Raiseandlowerthebowltodistributetheoilonto  raiseorlower.
 therods.
GearOilMeter ContactaGlobeauthorizedservicertochangethe  Onceayear.Whenthegearoil
(SP62Pand gearoil.  metershowstheoilbeingbelow
SP80PLonly)   halfofthecircle.