Globe SP30 - User Manual

101 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

S6161-1K-FSE-010

0910-LP-113-0781

INSTRUCTION MANUAL FOR

GLOBE MIXER MODEL SP-25

N00024-11-C-2111

GLOBE FOOD EQUIPMENT COMPANY

2153 DRYDEN RD.

DAYTON, OH 45439

DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES

ONLY. PROPRIETARY INFORMATION: APRIL 2013. OTHER REQUESTS SHALL BE REFERRED TO

COMNAVSEASYSCOM 07L. NO SECONDARY DISTRIBUTION AUTHORIZED WITHOUT WRITTEN

APPROVAL OF THE APPLICABLE COMNAVSEASYSCOM PROGRAM MANAGEMENT OFFICE.

WARNING- THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY

THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET. SEQ.) OR THE EXPORT

ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C. APP. 2401 ET. SEQ. VIOLATIONS OF

THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH PROVISIONS OF OPNAVINST 5510.161.

DESTRUCTION NOTICE- DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF

CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS COMMAND

APRIL 29, 2013

Other manuals for Globe SP30

Owner's Manual20 pages

Questions and Answers

C
Cristina BrownSep 18, 2025
Why does my Globe Mixer stop during the mixing cycle?
- D
  Danielle BrownSep 18, 2025
  Your Globe Mixer might stop during the mixing cycle due to a few reasons: * The internal overload may have tripped. For SP25 and smaller models, press the stop button, then press the reset button on the back of the mixer. For larger models, wait two minutes then press the START button to restart the mixer. If it continues to trip, consider reducing the batch size or adjusting your recipe. * The transmission belt might be damaged or broken. In this case, contact a technician to replace the belt. * For SP80PL models only, changing speeds during mixing can cause this. Return the speed control lever to a speed model position and restart the mixer.
M
Michael KellerAug 25, 2025
What to do if my Globe Mixer won't turn on?
- A
  Angela RiceAug 26, 2025
  If your Globe Mixer won't turn on, check that the bowl guard is fully closed by rotating it to the right. Ensure the bowl is raised to its highest position. Verify the timer is engaged by turning it past '0' or setting it to the green 'on' position. Confirm all power connections and the circuit breaker are working. Also, make sure the gear is fully engaged.
J
Jennifer CarrollAug 26, 2025
What to do if my Globe Mixer will not run?
- J
  Jessica RodriguezAug 27, 2025
  If your Globe Mixer won't start, there are several potential causes: * The timer might not be engaged. Turn the timer on by pressing the up arrow to set a time. * The bowl may not be raised and locked into position. Ensure the bowl is properly raised and locked. * There could be a power issue. Check all power connections and plug the mixer directly into a working outlet (do not use an extension cord). Test the outlet with another device. * The building's circuit breaker might be off. Check the breaker box. * An internal overload may have tripped. Press the stop button, then press the reset button. * The speed control lever may be positioned between speeds. Ensure the switch gear is fully in position.
V
Victoria GrayAug 27, 2025
Why does my Globe SP30 Mixer stop during mixing?
- D
  Daniel RobinsonAug 27, 2025
  Your Globe Mixer might be stopping during mixing because the internal overload has tripped. To resolve this, press the stop button, then press the reset button.
C
Christine PageSep 23, 2025
What to do if agitators won’t go onto the planetary shaft easily on my Globe SP30?
- N
  Nathan LewisSep 23, 2025
  If agitators won’t easily attach to the planetary shaft on your Globe Mixer, it's likely due to a lack of lubrication or cleaning of the shaft. Wipe the planetary shaft with a clean, damp cloth and then lubricate it with mineral oil or food-quality grease.
G
Gloria HarrellNov 22, 2025
Why is my Globe SP30 Mixer not running?
- K
  kimberlymasonNov 22, 2025
  Your Globe Mixer might not be running due to several reasons. Ensure the bowl guard is fully closed by rotating it to the right. Check that the bowl is raised to its highest position. Make sure the timer is engaged by turning it at least five minutes past '0', then set it to the desired time or the green 'on' position. Verify all power connections and plug the mixer into a live socket, avoiding extension cords, and test the socket. Also, check the building's circuit breaker. If the internal overload tripped, for SP25 and smaller models, press the stop button, then the reset button; for larger models, wait two minutes, press the stop button, then the start button. Finally, ensure the gear is fully engaged by switching it into position, as the mixer won't operate if the speed control lever i...
M
Matthew AllisonSep 10, 2025
What to do if bowl raise sticking or not operational on Globe SP30 Mixer?
- K
  kathleen36Sep 10, 2025
  If the bowl raise mechanism is sticking or not operational, it is likely due to a lack of lubrication on the bowl slides. Lubricate the bowl slides with mineral oil or food quality grease.
K
Kimberly HarmonSep 12, 2025
Why are the whip wires broken on my Globe SP30 Mixer?
- D
  diamondfoleySep 12, 2025
  Broken whip wires can occur if: * The batch size is too large for the mixer. Reduce the batch size and adjust the recipe. * The mixture is too firm, or the speed is too high. Reduce the speed. * A hand utensil was dropped into the bowl while mixing. Always stop the mixer before working on the mixture.
A
Amber CunninghamSep 3, 2025
What to do if one or more gears not working on my Globe Mixer?
- I
  Ian KellySep 3, 2025
  If one or more gears are not working on your Globe Mixer, it is likely due to a damaged or broken gear. A technician needs to replace the gear. Always stop the mixer before changing speeds!
B
Barbara DunnSep 1, 2025
Why won’t agitators go onto planetary shaft easily on my Globe SP30?
- J
  Joshua TurnerSep 2, 2025
  If the agitators won’t go onto the planetary shaft easily on your Globe Mixer, it's likely due to a lack of lubrication and/or cleaning of the planetary shaft. Wipe the planetary shaft with a clean, damp cloth and lubricate the shaft with mineral oil or food quality grease.

Summary

Approval and Procurement Record

Record of Alterations

Safety Summary

General Safety Precautions

General environmental, safety, and occupational health notices.

Circuit and Equipment Safety

Warnings about live circuits, servicing alone, and live equipment.

Resuscitation and Handling Heavy Equipment

Safety regarding resuscitation and handling heavy equipment.

Part 1 Instruction Manual for Globe Mixers

Attention Owners and Operators

Crucial information for owners and operators on safe and proper use of the equipment.

Key Components of the Mixer

Identification of the main parts and controls of the mixer.

Installation

Instructions for unpacking, setting up, and connecting the mixer to power.

Operating Instructions

Detailed steps for using the mixer, including bowl and agitator handling.

Cleaning Instructions

Guidelines for cleaning various parts of the mixer for hygiene and maintenance.

Important Points

Key considerations for installation, operation, and maintenance for proper service.

Recommended Maintenance

Schedule and procedures for maintaining the mixer's components for longevity.

Capacity Chart

Table detailing maximum capacities for different products and mixer models.

Troubleshooting

Common problems, their causes, and recommended solutions for mixer issues.

Limited Mixer Warranty

Terms and conditions of the warranty for the mixer equipment.

Part 2 Electrical Diagram

SP25 PLANETARY MIXER 120 V Single Phase

Wiring and component diagram for the SP25 mixer, 120V single phase.

Part 3 Parts Catalog

MIXERS

Catalog of replacement parts for Globe mixers.

Part 4 Globe Food Equipment Co. July 2012 U.S.A. Parts Price List

Globe SP30 Specifications

General

Brand	Globe
Model	SP30
Category	Mixer
Language	English

Related product manuals

Preview: Globe SP10

Preview: Globe SP05

Preview: Globe SP62P-4