Globe SP05 - User Manual

16 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Instruction Manual for the Globe Mixer

Model

SP08

Model SP08

This manual contains important safety instructions which

must be strictly followed when using this equipment.

For additional Technical Support call Globe at 1-866-260-0522.

- IMPORTANT SAFETY NOTICE -

For all after sales support, visit www.globefoodequip.com

• Complete the Warranty Registration

• Find an Authorized Servicer

• View Parts Catalogs

Maintain and use this manual as a reference for training.

Model #:

Serial #:

Date of

Purchase:

Table of Contents

Questions and Answers

S
Scott ThompsonSep 18, 2025
Why does my Globe Mixer stop during the mixing cycle?
- M
  millerdebraSep 18, 2025
  Your Globe Mixer might stop during the mixing cycle due to a few reasons: * The internal overload may have tripped. For SP25 and smaller models, press the stop button, then press the reset button on the back of the mixer. For larger models, wait two minutes then press the START button to restart the mixer. If it continues to trip, consider reducing the batch size or adjusting your recipe. * The transmission belt might be damaged or broken. In this case, contact a technician to replace the belt. * For SP80PL models only, changing speeds during mixing can cause this. Return the speed control lever to a speed model position and restart the mixer.
A
Alexander HillAug 25, 2025
What to do if my Globe SP05 Mixer won't turn on?
- M
  Mitchell McculloughAug 26, 2025
  If your Globe Mixer won't turn on, check that the bowl guard is fully closed by rotating it to the right. Ensure the bowl is raised to its highest position. Verify the timer is engaged by turning it past '0' or setting it to the green 'on' position. Confirm all power connections and the circuit breaker are working. Also, make sure the gear is fully engaged.
E
Elizabeth TurnerAug 26, 2025
What to do if my Globe Mixer will not run?
- K
  Katherine OlsonAug 26, 2025
  If your Globe Mixer won't start, there are several potential causes: * The timer might not be engaged. Turn the timer on by pressing the up arrow to set a time. * The bowl may not be raised and locked into position. Ensure the bowl is properly raised and locked. * There could be a power issue. Check all power connections and plug the mixer directly into a working outlet (do not use an extension cord). Test the outlet with another device. * The building's circuit breaker might be off. Check the breaker box. * An internal overload may have tripped. Press the stop button, then press the reset button. * The speed control lever may be positioned between speeds. Ensure the switch gear is fully in position.
G
gabriellecookAug 27, 2025
Why does my Globe SP05 Mixer stop during mixing?
- K
  Karen StrongAug 27, 2025
  Your Globe Mixer might be stopping during mixing because the internal overload has tripped. To resolve this, press the stop button, then press the reset button.
V
Veronica FrenchSep 23, 2025
What to do if agitators won’t go onto the planetary shaft easily on my Globe SP05 Mixer?
- E
  ericcarneySep 23, 2025
  If agitators won’t easily attach to the planetary shaft on your Globe Mixer, it's likely due to a lack of lubrication or cleaning of the shaft. Wipe the planetary shaft with a clean, damp cloth and then lubricate it with mineral oil or food-quality grease.
C
Carolyn GarciaNov 22, 2025
Why is my Globe SP05 Mixer not running?
- B
  brobertsNov 22, 2025
  Your Globe Mixer might not be running due to several reasons. Ensure the bowl guard is fully closed by rotating it to the right. Check that the bowl is raised to its highest position. Make sure the timer is engaged by turning it at least five minutes past '0', then set it to the desired time or the green 'on' position. Verify all power connections and plug the mixer into a live socket, avoiding extension cords, and test the socket. Also, check the building's circuit breaker. If the internal overload tripped, for SP25 and smaller models, press the stop button, then the reset button; for larger models, wait two minutes, press the stop button, then the start button. Finally, ensure the gear is fully engaged by switching it into position, as the mixer won't operate if the speed control lever i...
J
Janice BrownSep 10, 2025
What to do if bowl raise sticking or not operational on Globe SP05?
- M
  Melissa PottsSep 10, 2025
  If the bowl raise mechanism is sticking or not operational, it is likely due to a lack of lubrication on the bowl slides. Lubricate the bowl slides with mineral oil or food quality grease.
A
ashley65Sep 12, 2025
Why are the whip wires broken on my Globe SP05?
- C
  Cassandra PhillipsSep 12, 2025
  Broken whip wires can occur if: * The batch size is too large for the mixer. Reduce the batch size and adjust the recipe. * The mixture is too firm, or the speed is too high. Reduce the speed. * A hand utensil was dropped into the bowl while mixing. Always stop the mixer before working on the mixture.
J
Jason PetersSep 3, 2025
What to do if one or more gears not working on my Globe SP05?
- S
  Shelby CollinsSep 3, 2025
  If one or more gears are not working on your Globe Mixer, it is likely due to a damaged or broken gear. A technician needs to replace the gear. Always stop the mixer before changing speeds!
A
Austin HendersonSep 1, 2025
Why won’t agitators go onto planetary shaft easily on my Globe Mixer?
- K
  Kari BlackSep 2, 2025
  If the agitators won’t go onto the planetary shaft easily on your Globe Mixer, it's likely due to a lack of lubrication and/or cleaning of the planetary shaft. Wipe the planetary shaft with a clean, damp cloth and lubricate the shaft with mineral oil or food quality grease.

Globe SP05 Specifications

General

Brand	Globe
Model	SP05
Category	Mixer
Language	English

Related product manuals

Preview: Globe SP10

Preview: Globe SP62P-4