Globe SP05 - Troubleshooting

Page 13
Problem Possible Causes Action Required
Mixer will not run. Timer is not engaged. Turn timer on by pressing up arrow
to a set time.
Bowl not raised into position. Raise bowl and lock into position.
Power not connected properly. Check all power connections. Plug into
  DOLYHVRFNHWDo not use extension
cord!) Test socket with another item.
Building circuit breaker is off. Check breaker box.
Internal overload tripped. Press stop button, then press reset
button.
*HDUQRWHQJDJHG 6ZLWFKJHDUIXOO\LQWRSRVLWLRQMixer
will not operate if speed control
lever is positioned between speeds)
Mixer stops during Internal overload tripped. Press stop button, then press reset
mixing. button.
Mixer is noisy. Mixer is not installed on level surface. Adjust surface or relocate mixer.
Bowl not seated correctly or clamps Ensure bowl is seated into bowl cradle
not in place. correctly and bowl clamps are locked into
place.
 $JLWDWRUQRW¿WWHGSURSHUO\ 5HPRYHDQGUHDWWDFKDJLWDWRULQWRSRVLWLRQ
properly.
 2YHUORDGLQJERZO 5HGXFHEDWFKVL]HSee Capacity Chart
Mixing time is too long. Batch size too small. Increase batch size or use smaller bowl
  DGDSWHUNLWContact dealer for purchase
Incorrect recipe portions or Follow portions and temperatures per
temperatures. recipe instructions.
Bowl raise sticking or Lack of lubrication and/or cleaning of Hand wash using mild soap and water; dry,
not operational bowl slides and lubricate bowl slides with mineral oil or
food quality grease. If still sticking, a
technician must clean bowl raise
mechanism.
One or more gears not Damaged or broken gear. Technician to replace gear. Always
working. stop mixer before changing speeds!
Troubleshooting