EasyManua.ls Logo

Globe SP20 - User Manual

Globe SP20
101 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
S6161-1K-FSE-010
0910-LP-113-0781
INSTRUCTION MANUAL FOR
GLOBE MIXER MODEL SP-25
N00024-11-C-2111
GLOBE FOOD EQUIPMENT COMPANY
2153 DRYDEN RD.
DAYTON, OH 45439
DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES
ONLY. PROPRIETARY INFORMATION: APRIL 2013. OTHER REQUESTS SHALL BE REFERRED TO
COMNAVSEASYSCOM 07L. NO SECONDARY DISTRIBUTION AUTHORIZED WITHOUT WRITTEN
APPROVAL OF THE APPLICABLE COMNAVSEASYSCOM PROGRAM MANAGEMENT OFFICE.
WARNING- THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY
THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET. SEQ.) OR THE EXPORT
ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C. APP. 2401 ET. SEQ. VIOLATIONS OF
THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF OPNAVINST 5510.161.
DESTRUCTION NOTICE- DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF
CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS COMMAND
APRIL 29, 2013

Other manuals for Globe SP20

Preview: Owner's Manual
Owner's Manual20 pages

Questions and Answers

  • C
    Christina WestSep 18, 2025
    Why does my Globe SP20 Mixer stop during the mixing cycle?
    • V
      Vickie KramerSep 18, 2025
      Your Globe Mixer might stop during the mixing cycle due to a few reasons: * The internal overload may have tripped. For SP25 and smaller models, press the stop button, then press the reset button on the back of the mixer. For larger models, wait two minutes then press the START button to restart the mixer. If it continues to trip, consider reducing the batch size or adjusting your recipe. * The transmission belt might be damaged or broken. In this case, contact a technician to replace the belt. * For SP80PL models only, changing speeds during mixing can cause this. Return the speed control lever to a speed model position and restart the mixer.
  • E
    Erin YoungAug 25, 2025
    What to do if my Globe SP20 won't turn on?
    • H
      Hector ChambersAug 26, 2025
      If your Globe Mixer won't turn on, check that the bowl guard is fully closed by rotating it to the right. Ensure the bowl is raised to its highest position. Verify the timer is engaged by turning it past '0' or setting it to the green 'on' position. Confirm all power connections and the circuit breaker are working. Also, make sure the gear is fully engaged.
  • I
    iboydAug 26, 2025
    What to do if my Globe SP20 will not run?
    • K
      Kendra HannaAug 27, 2025
      If your Globe Mixer won't start, there are several potential causes: * The timer might not be engaged. Turn the timer on by pressing the up arrow to set a time. * The bowl may not be raised and locked into position. Ensure the bowl is properly raised and locked. * There could be a power issue. Check all power connections and plug the mixer directly into a working outlet (do not use an extension cord). Test the outlet with another device. * The building's circuit breaker might be off. Check the breaker box. * An internal overload may have tripped. Press the stop button, then press the reset button. * The speed control lever may be positioned between speeds. Ensure the switch gear is fully in position.
  • J
    Jeremiah RoyAug 27, 2025
    Why does my Globe Mixer stop during mixing?
    • N
      Nicole BrownAug 27, 2025
      Your Globe Mixer might be stopping during mixing because the internal overload has tripped. To resolve this, press the stop button, then press the reset button.
  • T
    Tommy SmithSep 23, 2025
    What to do if agitators won’t go onto the planetary shaft easily on my Globe SP20?
    • J
      jamesnewtonSep 23, 2025
      If agitators won’t easily attach to the planetary shaft on your Globe Mixer, it's likely due to a lack of lubrication or cleaning of the shaft. Wipe the planetary shaft with a clean, damp cloth and then lubricate it with mineral oil or food-quality grease.
  • L
    laura90Nov 22, 2025
    Why is my Globe Mixer not running?
    • M
      Michelle MarshallNov 22, 2025
      Your Globe Mixer might not be running due to several reasons. Ensure the bowl guard is fully closed by rotating it to the right. Check that the bowl is raised to its highest position. Make sure the timer is engaged by turning it at least five minutes past '0', then set it to the desired time or the green 'on' position. Verify all power connections and plug the mixer into a live socket, avoiding extension cords, and test the socket. Also, check the building's circuit breaker. If the internal overload tripped, for SP25 and smaller models, press the stop button, then the reset button; for larger models, wait two minutes, press the stop button, then the start button. Finally, ensure the gear is fully engaged by switching it into position, as the mixer won't operate if the speed control lever i...
  • R
    Ronald RiosSep 10, 2025
    What to do if bowl raise sticking or not operational on Globe Mixer?
    • M
      matthew04Sep 10, 2025
      If the bowl raise mechanism is sticking or not operational, it is likely due to a lack of lubrication on the bowl slides. Lubricate the bowl slides with mineral oil or food quality grease.
  • M
    moorewilliamSep 12, 2025
    Why are the whip wires broken on my Globe SP20?
    • L
      Lindsay PalmerSep 12, 2025
      Broken whip wires can occur if: * The batch size is too large for the mixer. Reduce the batch size and adjust the recipe. * The mixture is too firm, or the speed is too high. Reduce the speed. * A hand utensil was dropped into the bowl while mixing. Always stop the mixer before working on the mixture.
  • J
    Jared YoungSep 3, 2025
    What to do if one or more gears not working on my Globe SP20?
    • L
      Lisa CantrellSep 3, 2025
      If one or more gears are not working on your Globe Mixer, it is likely due to a damaged or broken gear. A technician needs to replace the gear. Always stop the mixer before changing speeds!
  • B
    Bradley McneilSep 1, 2025
    Why won’t agitators go onto planetary shaft easily on my Globe SP20?
    • C
      Christopher TownsendSep 1, 2025
      If the agitators won’t go onto the planetary shaft easily on your Globe Mixer, it's likely due to a lack of lubrication and/or cleaning of the planetary shaft. Wipe the planetary shaft with a clean, damp cloth and lubricate the shaft with mineral oil or food quality grease.

Summary

Part 1 Instruction Manual for Globe Mixers

Attention Owners and Operators

Important introductory safety and operational guidance for users.

Key Components of the Mixer

Identifies and illustrates the main parts and controls of the mixer.

Installation

Step-by-step instructions for setting up the mixer, including unpacking and connecting power.

Operating Instructions

Detailed steps for using the mixer, including speed selection and mixing procedures.

Cleaning Instructions

Detailed procedures for cleaning different parts of the mixer and ensuring sanitation.

Important Points

Key operational and installation considerations for optimal mixer performance.

Recommended Maintenance

Schedule and procedures for routine maintenance to ensure longevity.

Capacity Chart

Lists maximum capacities for various products and ingredients based on mixer model.

Part 2 Electrical Diagram

Electrical Diagram

Schematic showing the electrical connections and components of the mixer.

Wiring Diagram

Visual representation of how electrical components are wired together in the mixer.

Part 3 Parts Catalog

Base Components

Exploded view and list of parts for the mixer's base assembly.

Head Components

Exploded view and list of parts for the mixer's head assembly.

Hub Assembly Components

Exploded view and list of parts for the mixer's attachment hub.

Planetary Components

Exploded view and list of parts for the mixer's planetary drive system.

Gearbox Components

Exploded view and list of parts for the mixer's gearbox assembly.

Motor Components

Exploded view and list of parts for the mixer's motor assembly.

Motor Brake Components

Exploded view and list of parts for the motor brake assembly on SPC25 models.

Globe SP20 Specifications

General IconGeneral
ManufacturerGlobe
ModelSP20
CategoryMixer
Capacity20 quarts
Speeds3
Phase1
Frequency60 Hz
ColorGray
Voltage115 V
MaterialStainless Steel

Related product manuals