EasyManua.ls Logo

Globe SP60 - User Manual

Globe SP60
101 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
S6161-1K-FSE-010
0910-LP-113-0781
INSTRUCTION MANUAL FOR
GLOBE MIXER MODEL SP-25
N00024-11-C-2111
GLOBE FOOD EQUIPMENT COMPANY
2153 DRYDEN RD.
DAYTON, OH 45439
DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES
ONLY. PROPRIETARY INFORMATION: APRIL 2013. OTHER REQUESTS SHALL BE REFERRED TO
COMNAVSEASYSCOM 07L. NO SECONDARY DISTRIBUTION AUTHORIZED WITHOUT WRITTEN
APPROVAL OF THE APPLICABLE COMNAVSEASYSCOM PROGRAM MANAGEMENT OFFICE.
WARNING- THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY
THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET. SEQ.) OR THE EXPORT
ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C. APP. 2401 ET. SEQ. VIOLATIONS OF
THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF OPNAVINST 5510.161.
DESTRUCTION NOTICE- DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF
CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS COMMAND
APRIL 29, 2013

Other manuals for Globe SP60

Preview: Owner's Manual
Owner's Manual20 pages

Questions and Answers

  • T
    Tyler WilliamsSep 18, 2025
    Why does my Globe Mixer stop during the mixing cycle?
    • B
      baileyjeffreySep 18, 2025
      Your Globe Mixer might stop during the mixing cycle due to a few reasons: * The internal overload may have tripped. For SP25 and smaller models, press the stop button, then press the reset button on the back of the mixer. For larger models, wait two minutes then press the START button to restart the mixer. If it continues to trip, consider reducing the batch size or adjusting your recipe. * The transmission belt might be damaged or broken. In this case, contact a technician to replace the belt. * For SP80PL models only, changing speeds during mixing can cause this. Return the speed control lever to a speed model position and restart the mixer.
  • J
    jbarrettAug 25, 2025
    What to do if my Globe SP60 Mixer won't turn on?
    • R
      rosssherryAug 26, 2025
      If your Globe Mixer won't turn on, check that the bowl guard is fully closed by rotating it to the right. Ensure the bowl is raised to its highest position. Verify the timer is engaged by turning it past '0' or setting it to the green 'on' position. Confirm all power connections and the circuit breaker are working. Also, make sure the gear is fully engaged.
  • D
    Denise HansonAug 26, 2025
    What to do if my Globe SP60 Mixer will not run?
    • A
      Adrian CollinsAug 27, 2025
      If your Globe Mixer won't start, there are several potential causes: * The timer might not be engaged. Turn the timer on by pressing the up arrow to set a time. * The bowl may not be raised and locked into position. Ensure the bowl is properly raised and locked. * There could be a power issue. Check all power connections and plug the mixer directly into a working outlet (do not use an extension cord). Test the outlet with another device. * The building's circuit breaker might be off. Check the breaker box. * An internal overload may have tripped. Press the stop button, then press the reset button. * The speed control lever may be positioned between speeds. Ensure the switch gear is fully in position.
  • J
    Jeremy WardAug 27, 2025
    Why does my Globe SP60 Mixer stop during mixing?
    • C
      Caleb WebbAug 27, 2025
      Your Globe Mixer might be stopping during mixing because the internal overload has tripped. To resolve this, press the stop button, then press the reset button.
  • R
    Rachel Cohen MDSep 23, 2025
    What to do if agitators won’t go onto the planetary shaft easily on my Globe Mixer?
    • E
      erikacisnerosSep 23, 2025
      If agitators won’t easily attach to the planetary shaft on your Globe Mixer, it's likely due to a lack of lubrication or cleaning of the shaft. Wipe the planetary shaft with a clean, damp cloth and then lubricate it with mineral oil or food-quality grease.
  • N
    Nancy BlakeNov 22, 2025
    Why is my Globe SP60 not running?
    • R
      Richard SmithNov 22, 2025
      Your Globe Mixer might not be running due to several reasons. Ensure the bowl guard is fully closed by rotating it to the right. Check that the bowl is raised to its highest position. Make sure the timer is engaged by turning it at least five minutes past '0', then set it to the desired time or the green 'on' position. Verify all power connections and plug the mixer into a live socket, avoiding extension cords, and test the socket. Also, check the building's circuit breaker. If the internal overload tripped, for SP25 and smaller models, press the stop button, then the reset button; for larger models, wait two minutes, press the stop button, then the start button. Finally, ensure the gear is fully engaged by switching it into position, as the mixer won't operate if the speed control lever i...
  • J
    jenniferwoodSep 10, 2025
    What to do if bowl raise sticking or not operational on Globe SP60?
    • C
      Courtney BakerSep 10, 2025
      If the bowl raise mechanism is sticking or not operational, it is likely due to a lack of lubrication on the bowl slides. Lubricate the bowl slides with mineral oil or food quality grease.
  • J
    jonesrobertSep 12, 2025
    Why are the whip wires broken on my Globe Mixer?
    • D
      Dawn ThomasSep 12, 2025
      Broken whip wires can occur if: * The batch size is too large for the mixer. Reduce the batch size and adjust the recipe. * The mixture is too firm, or the speed is too high. Reduce the speed. * A hand utensil was dropped into the bowl while mixing. Always stop the mixer before working on the mixture.
  • W
    William JonesSep 3, 2025
    What to do if one or more gears not working on my Globe SP60 Mixer?
    • P
      pittsthomasSep 3, 2025
      If one or more gears are not working on your Globe Mixer, it is likely due to a damaged or broken gear. A technician needs to replace the gear. Always stop the mixer before changing speeds!
  • B
    Brian WellsSep 1, 2025
    Why won’t agitators go onto planetary shaft easily on my Globe Mixer?
    • A
      Alexander PachecoSep 1, 2025
      If the agitators won’t go onto the planetary shaft easily on your Globe Mixer, it's likely due to a lack of lubrication and/or cleaning of the planetary shaft. Wipe the planetary shaft with a clean, damp cloth and lubricate the shaft with mineral oil or food quality grease.

Summary

Manual Administration

Approval and Procurement Record

Details of manual approval, authority, and procurement data.

Record of Alterations

Manual Alterations Log

Log of changes made to the manual.

Safety Guidelines

General Safety Summary

Overview of ESOH notices, electrical, handling, and hygiene precautions.

Attention Owners and Operators

Owner responsibilities, training, supervision, and warning label overview.

Part 1: Instruction Manual

Mixer Models and Service Information

Lists covered mixer models and contact details for service.

Installation Procedures

Steps for unpacking, setup, and connecting the mixer.

Operating Instructions

Guidance on using the mixer safely and effectively, including controls.

Cleaning Instructions

Procedures for cleaning the mixer and its components.

Troubleshooting and Warranty

Troubleshooting Guide

Common problems, possible causes, and solutions for mixer issues.

Limited Mixer Warranty

Terms, conditions, exclusions, and registration for product warranty.

Part 2: Technical Diagrams

SP25 Electrical and Wiring Diagrams

Schematics of the mixer's electrical system and wiring layout.

Parts Catalog and Price List

Parts Identification and Breakdown

Visual breakdown of mixer components (Base, Head, Hub, etc.).

Parts Price List

Comprehensive list of all available parts with prices.

Globe SP60 Specifications

General IconGeneral
ManufacturerGlobe
ModelSP60
Frequency60 Hz
TypeMixer
Capacity60 qt
MaterialStainless Steel

Related product manuals