EasyManua.ls Logo

Globe SP40 - User Manual

Globe SP40
101 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
S6161-1K-FSE-010
0910-LP-113-0781
INSTRUCTION MANUAL FOR
GLOBE MIXER MODEL SP-25
N00024-11-C-2111
GLOBE FOOD EQUIPMENT COMPANY
2153 DRYDEN RD.
DAYTON, OH 45439
DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES
ONLY. PROPRIETARY INFORMATION: APRIL 2013. OTHER REQUESTS SHALL BE REFERRED TO
COMNAVSEASYSCOM 07L. NO SECONDARY DISTRIBUTION AUTHORIZED WITHOUT WRITTEN
APPROVAL OF THE APPLICABLE COMNAVSEASYSCOM PROGRAM MANAGEMENT OFFICE.
WARNING- THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY
THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET. SEQ.) OR THE EXPORT
ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C. APP. 2401 ET. SEQ. VIOLATIONS OF
THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN
ACCORDANCE WITH PROVISIONS OF OPNAVINST 5510.161.
DESTRUCTION NOTICE- DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF
CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS COMMAND
APRIL 29, 2013

Other manuals for Globe SP40

Preview: Owner's Manual
Owner's Manual20 pages

Questions and Answers

  • P
    Paul EdwardsSep 18, 2025
    Why does my Globe SP40 stop during the mixing cycle?
    • J
      Joseph BanksSep 18, 2025
      Your Globe Mixer might stop during the mixing cycle due to a few reasons: * The internal overload may have tripped. For SP25 and smaller models, press the stop button, then press the reset button on the back of the mixer. For larger models, wait two minutes then press the START button to restart the mixer. If it continues to trip, consider reducing the batch size or adjusting your recipe. * The transmission belt might be damaged or broken. In this case, contact a technician to replace the belt. * For SP80PL models only, changing speeds during mixing can cause this. Return the speed control lever to a speed model position and restart the mixer.
  • S
    Susan SandovalAug 25, 2025
    What to do if my Globe SP40 won't turn on?
    • N
      nicholas97Aug 26, 2025
      If your Globe Mixer won't turn on, check that the bowl guard is fully closed by rotating it to the right. Ensure the bowl is raised to its highest position. Verify the timer is engaged by turning it past '0' or setting it to the green 'on' position. Confirm all power connections and the circuit breaker are working. Also, make sure the gear is fully engaged.
  • A
    Angela LeonardAug 27, 2025
    What to do if my Globe Mixer will not run?
    • J
      josephcolleenAug 27, 2025
      If your Globe Mixer won't start, there are several potential causes: * The timer might not be engaged. Turn the timer on by pressing the up arrow to set a time. * The bowl may not be raised and locked into position. Ensure the bowl is properly raised and locked. * There could be a power issue. Check all power connections and plug the mixer directly into a working outlet (do not use an extension cord). Test the outlet with another device. * The building's circuit breaker might be off. Check the breaker box. * An internal overload may have tripped. Press the stop button, then press the reset button. * The speed control lever may be positioned between speeds. Ensure the switch gear is fully in position.
  • L
    Lisa MaxwellAug 27, 2025
    Why does my Globe SP40 stop during mixing?
    • R
      Robert ValdezAug 27, 2025
      Your Globe Mixer might be stopping during mixing because the internal overload has tripped. To resolve this, press the stop button, then press the reset button.
  • J
    Jennifer ShieldsSep 23, 2025
    What to do if agitators won’t go onto the planetary shaft easily on my Globe Mixer?
    • H
      hardingnathanSep 23, 2025
      If agitators won’t easily attach to the planetary shaft on your Globe Mixer, it's likely due to a lack of lubrication or cleaning of the shaft. Wipe the planetary shaft with a clean, damp cloth and then lubricate it with mineral oil or food-quality grease.
  • J
    Joshua HernandezNov 22, 2025
    Why is my Globe Mixer not running?
    • T
      Timothy FitzgeraldNov 22, 2025
      Your Globe Mixer might not be running due to several reasons. Ensure the bowl guard is fully closed by rotating it to the right. Check that the bowl is raised to its highest position. Make sure the timer is engaged by turning it at least five minutes past '0', then set it to the desired time or the green 'on' position. Verify all power connections and plug the mixer into a live socket, avoiding extension cords, and test the socket. Also, check the building's circuit breaker. If the internal overload tripped, for SP25 and smaller models, press the stop button, then the reset button; for larger models, wait two minutes, press the stop button, then the start button. Finally, ensure the gear is fully engaged by switching it into position, as the mixer won't operate if the speed control lever i...
  • T
    Timothy ThompsonSep 10, 2025
    What to do if bowl raise sticking or not operational on Globe SP40?
    • C
      Claudia Sawyer DDSSep 10, 2025
      If the bowl raise mechanism is sticking or not operational, it is likely due to a lack of lubrication on the bowl slides. Lubricate the bowl slides with mineral oil or food quality grease.
  • M
    Marc WigginsSep 12, 2025
    Why are the whip wires broken on my Globe Mixer?
    • B
      brendakimSep 12, 2025
      Broken whip wires can occur if: * The batch size is too large for the mixer. Reduce the batch size and adjust the recipe. * The mixture is too firm, or the speed is too high. Reduce the speed. * A hand utensil was dropped into the bowl while mixing. Always stop the mixer before working on the mixture.
  • F
    Felicia SnowSep 3, 2025
    What to do if one or more gears not working on my Globe SP40?
    • J
      Jacqueline PowellSep 3, 2025
      If one or more gears are not working on your Globe Mixer, it is likely due to a damaged or broken gear. A technician needs to replace the gear. Always stop the mixer before changing speeds!
  • M
    Michael ChenSep 1, 2025
    Why won’t agitators go onto planetary shaft easily on my Globe Mixer?
    • M
      marypageSep 2, 2025
      If the agitators won’t go onto the planetary shaft easily on your Globe Mixer, it's likely due to a lack of lubrication and/or cleaning of the planetary shaft. Wipe the planetary shaft with a clean, damp cloth and lubricate the shaft with mineral oil or food quality grease.

Summary

Attention Owners and Operators

GENERAL

General environmental, safety, and occupational health notices and precautions.

WARNINGS AND CAUTIONS

Provides visual indicators for personal safety and potential equipment damage warnings.

Key Components of the Mixer

Installation

UNPACKING

Procedures for unpacking the mixer upon receipt and handling damaged items.

GENERAL INSTALLATION STEPS

Step-by-step guide for preparing and positioning the mixer.

ELECTRICAL CONNECTION

Instructions for safely connecting the mixer to electrical power.

THREE PHASE UNIT INSTALLATION

Guidance for connecting and verifying rotation of three-phase mixer units.

Operating Instructions

SAFETY DURING OPERATION

Warnings to ensure safe mixer operation and prevent injury.

BOWL GUARD AND BOWL HANDLING

Procedures for operating, removing, and attaching the bowl guard and bowl.

ATTACHING AGITATOR AND MIXING

Installing agitators, adding ingredients, and starting the mixing process.

MIXER STARTUP AND SPEED CONTROL

Starting the mixer, selecting speeds, and managing overload protection.

USING ATTACHMENTS

Instructions for safely installing and using mixer attachments.

DIGITAL CONTROL MODES (SP62 P;SP80 PL)

Instructions for using Manual and Timer modes on SP62P/SP80PL digital controls.

Cleaning Instructions

CLEANING SAFETY GUIDELINES

Cautions for safe cleaning procedures, including electrical disconnection.

Important Points

Recommended Maintenance

Capacity Chart

Troubleshooting

Limited Mixer Warranty

Part 2: Electrical Diagram

Part 3: Parts Catalog

ORDERING PARTS INFORMATION

Key details required for expedited parts shipment, including model, part number, and serial number.

Part 4: Globe Food Equipment Co. July 2012 U.S.A. Parts Price List

Globe SP40 Specifications

General IconGeneral
ManufacturerGlobe
ModelSP40
Speeds3
Frequency60 Hz
Capacity40 qt
MaterialStainless Steel

Related product manuals