EasyManua.ls Logo

Globe SP40 - Limited Mixer Warranty

Globe SP40
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page13
Operating Instructions
3. Oncethedesiredmixtimehasbeensetonthetimer,pressthe“Start”buttontobeginmixing.
Always STOP the mixer BEFORE changing speeds!
NOTE:TheSP62PandSP80PLwillautomaticallyshutoffifthespeedsarechangedwhilethemixerisinoperation.
4. Oncethe“Start”buttonhasbeenpressed,themixertimernumberswillbegintodescend.
Thetimerandmixercanbeinterruptedatanytimebypressingthe“Stop”button.Ifthetimercycleisinterruptedand
themixerhasnotyetnisheditssetmixingtime,themixingcyclecanbecontinuedfromwhereitleftoffbypressing
the“Start”button.
NOTE:Ifacycleisinterruptedbythebowlguardbeingopenedorthespeedofthemixerbeingchanged,themixer
willstop.Assoonasthefaultiscorrected,the“Start”buttoncanbepressedtocontinuetheprogrammedtime.
Toaddadditionalminutesorsecondstoamixtime,“Stop”themixer,press“TIMER”andadjustthecyclemixingtime.
Pressthe“Start”buttontobeginmixingonceagain.
5. Attheendofatimedmixingcyclethetimerwillcountdownto“00”minutesand“00”seconds,themixerwillstop,
andthetimerwillreturntodisplayingthelastmixcycletimethatwasentered.
6. Tobeginanothermixcyclewiththesamesettimeasthepreviousmix,pressthe“Start”button.
Ifthemixcycletimeneedstobeadjustedupordown,setthenewdesiredtimeandthenpressthe“Start”button
tobeginmixing.
Themixertimerwillalwaysresetbacktothelastmixtimethatwassetunlesstheplugorpowerisdisconnectedtothe
mixer.Ifpowerislosttothemixer,themixingtimewillneedtoberesettothedesiredtime.
3

Other manuals for Globe SP40

Related product manuals