Globe SP10 - Page 62

rev. 5/30/2012
Page 13 of 50
Globe Food Equipment Co.
July 2012 U.S.A Parts Price List
Item No. Item Description List $
384-3-AS CENTER PLATE SUPPORT ASSEMBLY $44.00
385-1 CENTER PLATE SUPPORT INSERT $15.60
391-2 GEAR HOUSING COVER .074 X 2 5/8 X 36 CRS STRIP $7.40
407-34 INSERT, TABLE ADJUSTING KNOB $45.20
41-A Foot Screw GC9/GC10/GC12 $0.80
41C BOTTOM ENCLOSURE SCREW FOR GC10, GC12, & GC12D $0.80
436-1 SLIDE BUMPER $3.20
436-3 SLIDE OIL FELT (UPPER) $1.00
436-4 SLIDE OIL FELT SPRING CLIP $0.80
436-7 Slide Bushing (2 required) $10.00
436-A SLIDE OIL TUBING $0.80
439-1 CHUTE SUPPORT SCREW (SHORT) 10-24 X 7/8 ROUND HEAD $0.80
439-2 CHUTE SUPPORT SCREW (LONG) 10-24 X 1 3/4 ROUND HEAD $0.80
448-1 SHARPENER BRACKET OVAL WASHER $1.60
450-H SHARPENER HOUSING $148.00
450-H-AS SHARPENER ASSEMBLY WITH COVER $476.00
453-AS TABLE ADJUSTING GEAR ASSEMBLY $68.00
456-AS SHARPENER LOCK ROD ASSEMBLY $2.80
45-A Chute Stud GC09 $0.80
462-1 Sharpener, Grinding Stone Sleeve Stop Screw $0.80
463-AS SHARPENER, GRINDING SHAFT ASSEMBLY $37.60
467-AS SHARPENER, TRUING SHAFT ASSY $50.00
46-A Chute Stud GC10/GC12 $0.80
470-1 SHARPENER LOCK BUSHING STOP SCREW $0.80
471-AS SHARPENER, TRUING STONE STOP ASSEMBLY $19.00
478-1 NUT, SLIDE BOLT $0.80
478-2 Nut $0.80
47-B BEARING, SMALL $7.80
481-1 CHUTE SUPPORT "T" BOLT S/S $3.40
482-B CHUTE HANDLE (BLACK) $3.80
487-3 END WEIGHT ROD CLIP $0.80
48-A Slide Rod Steel Spring GC9 $0.80
493-1 TABLE SLIDE STOP SCREW 5/16-18 X 1 HEX HEAD $1.00
495-1 SHARPENER HANDLE SET SCREW 10/32 X 9/16 HALF DOG HEADLESS $0.80
49-A Slide Rod Steel Spring GC10 $1.20
50-A Slide Rod Steel Spring GC12/GC12D $0.80
519-1 Globe Special Lubricating Oil (Quart Bottle) $64.40
519-S GLOBE SPECIAL LUBRICATING OIL (4 oz. Zoom Spout Bottle) $11.40
521-D Silicon Lubricant $62.00
56-A Screw, Knife Mounting $0.80
59-A Knife Cover Insert GC9/10/12 $2.20
59-B Cover Support Stud GC9/10/12 $4.80
612-2 Cam Follower Retaining Ring (Old#766-6) $3.80
627-C SCREW $0.80
62-B Endweight Bumper GC9 $0.80
63-B Endweight Bumper GC10/12/12D
$1.40
648-4 GEAR MOTOR SWITCH LOCKING RING $1.80
65-A Endweight Rod GC9 (7 1/2") $7.20
66-A Endweight Rod GC10 (8 3/4") $7.20
676-1 JUICE BOX CLIP (WITH STUDS) $30.40
676-3 JUICE BOX STUD NUT $0.80
676-AS JUICE BOX ASSEMBLY $144.00
67-A Endweight Rod GC12 (10") $10.60