Globe SP10 - Page 65

rev. 5/30/2012
Page 16 of 50
Globe Food Equipment Co.
July 2012 U.S.A Parts Price List
Item No. Item Description List $
829-2 SCRAPER BLADE $8.00
829-3 SCRAPER BLADE SCREW $1.40
829-4 SCRAPER BLADE NUT $2.00
829-AS Scraper Blade Clamp Assy. (Incl. 829-1,-2,-3,-4) $30.40
830-2 Chain Slide Stud Set Screw $1.60
831-1 Chute Receiver Cross Bar Screw $3.60
834-1 Motor 1/3HP 115V/60HZ/1PH $531.00
834-6R KNIFE MOTOR RESET BUTTON (CSA) $36.80
834-8F Knife Motor (1/2 HP-115V/60HZ/ 1PH) $487.00
834-9F Motor, Knife 1/2 hp 115v/60hz/1ph CSA $538.00
834-FS STARTING SWITCH (FRANKLIN 115V/60/1PH) $42.00
834-S SCREW 10-24 X 5/8 $0.80
83-A Chefmate Logo - Small "By Globe" $1.20
850-3 BASE PLUG BUTTON $0.80
851-1 BASE SHROUD SCREW $1.80
851-3FN BASE SHROUD SCREW FLANGE NUT $0.80
851-6P WARNING PLATE DRIVE PIN $0.80
853-2 CHUTE ARM HINGE PIN SHOULDER BUSHING $4.20
854-1 INTERLOCK SWITCH N.O. (GEAR HOUSING) $9.20
854-2 INTERLOCK SWITCH SCREW $0.80
854-3 INTERLOCK SWITCH SCREW NUT $0.80
854-4 INTERLOCK SWITCH INSULATING FIBRE $1.00
854-5 INTERLOCK SWITCH BRACKET $3.00
854-6 GROUND SCREW $0.80
854-7 GROUND WASHER (Same as part #761-7E) $0.80
854-8 INTERLOCK SWITCH PLUNGER $4.60
854-9 INTERLOCK SWITCH WIRE SET $3.40
855-1A LIMIT SWITCH SPACER BLOCK (PLASTIC) $1.20
855-3 LIMIT SWITCH SPACER BLOCK SCRW $0.80
856-1 RECEIVING TRAY CLIP <Obsolete Purchase 856 Assembly> $0.00
856-2 RECEIVING TRAY RETAINING KNOB $12.20
856-3 RECEIVING TRAY RETAINING KNOB SCREW $1.40
856-4 RECEIVING TRAY RETAINING SCREW $1.00
857-1 SLIDE BAR RETAINING CLIP (UPPER) $0.80
858-1 SLIDE BAR RETAINING CLIP (LOWER) $0.80
859-1 SLIDE ROD SCREW $0.80
860-1 SWITCH PLATE SCREW $1.00
861-L-AS SLICE DEFLECTOR ASSEMBLY (WITH LIGHT HOLE) $365.00
862-1 TABLE CLAMP SCREW $2.00
863-1 TABLE LIMIT SWITCH TRIPPING SCREW $0.80
867-1 TABLE MECHANISM COVER BRACKET SCREW $0.80
867-2 TABLE MECHANISM COVER BRACKET NUT $1.40
871-2 GFE Logo - Made in the USA $1.40
871-3 GFE Logo - Globe Name Only NO-Made in USA $2.60
873-CB CLEANING BRACE (MANUAL SLICER) $6.80
873-CB-1 3/8-16 HEX NUT
$0.80
879-5 Interlock Retainer Stud $17.00
879-AS KNIFE GUARD INTERLOCK STUD ASSEMBLY $53.20
881-4 WASHER $1.20
883-2 CHUTE RECEIVER SCREW $3.60
885-1BLR Swith Plate Blank $2.60
888-Z MOTOR PLATFORM ASSY. (MODEL 775 & 775L) $163.00
892-2 DRIVE CHAIN (38 LINK) (11,12 TOOTH SPROCKETS) $30.60