rev. 5/30/2012
July 2012 U.S.A Parts Price List
Item No. Item Description List $
A290 Drive Hub Assembly GC512 $253.00
A293 Nylon Gear $64.00
A299 Shim $2.40
A3000 Chute Mounting Screw-Short GC510 $1.00
A3001 Chute Mounting Screw-Long GC510 $1.00
A3002 Foot Screw GC510 $2.00
A301 Grinding Stone Knob $23.80
A302 Spring $3.20
A303 Honing Stone Knob $28.80
A304 BASE FOR A300 SHARPENER ASSY. OLD STYLE $65.80
A306 Sharpener Dust Cover $44.80
A311 Sharpener Housing $94.20
A312 Sharpener Cover Screw $14.20
A315 Sharpener Cover $72.60
A320 Grinding Stone Assembly $58.80
A330 Honing Stone Assembly $62.00
A401 End Weight Rod $17.80
A402 End Weight Spring $5.80
A413 Chute Handle $24.00
A420A Chute Assy SS - New Style (WITHOUT Support Assembly) $237.00
A421A Chute Support Assy - New Style $243.00
A450 End Weight Assembly $130.00
A451 End Weight Handle $29.00
A460 End Weight Hinge $42.60
A465 End Weight Stud Knob $24.00
AKER Start Capacitor $45.80
AKJD17 On/Off Switch GC510 (115V) $94.80
AN47 Key $3.20
AN68 Retaining Clip $2.80
AN71 SWITCH, ON/OFF TOGGLE GC512 $23.40
B1 WARNING DECAL $0.00
B107 Knob $45.60
B121 MOTOR CAPACIOR $33.60
B127 V-BELT $39.60
B190 MICROSWITCH $240.00
B191 UNIVERSAL BRACKET $22.40
B200 On/Off Switch $178.00
B202-11 Relay, 11 Pin $44.40
B202-8 Relay, 8 Pin $47.20
B383 BLADE, GBS201 7/16"-1/2" $28.00
B43 WASHER $0.80
B48 SCREW $1.20
B83 BLADE, GBS200 7/16"-1/2" *** INCLUDES LOCKNUT *** $18.40
B84 Blade Lock Nut $0.80
B85 Special Washer,BLADE $3.60
C0152 Drum
$172.00
C0160 24V Power Supply, NVR $228.00
CC1201 MOTOR CC12 $406.00
CC1202 Nut, Motor Gear CC12/CC22 $6.40
CC1203 Gear, Motor Drive CC12 $121.00
CC1204 Seal, Oil, Motor CC12/CC22 $25.80
CC1206 Key, Motor CC12/CC22 $6.40
CC1207 Plate Retainer CC12 $144.00
To Next Page
Loading...
