Globe SP10 - Page 73

rev. 5/30/2012
Page 24 of 50
Globe Food Equipment Co.
July 2012 U.S.A Parts Price List
Item No. Item Description List $
CC2265 ELECTRIC STARTER (OLD) BLACK, HORSESHOE SHAPED $84.00
CC2265S ELECTRIC START (NEW) GOLD, SQUARE SHAPED $94.60
CTP-01 STRIPPER COMBS (A) $63.00
CTP-02 UPPER CHAMBER $231.00
CTP-04 STRIPPER COMBS (B) $63.00
CTP-05 TIGHT KNOB $13.40
CTP-06 C-TYPE SNAP RING $4.80
CTP-07 SHAFT PROTECTOR $4.80
CTP-08 KNIVES $4.80
CTP-13 SHAFT PROTECTOR (B) $4.80
CTP-15 SHAFT PROTECTOR (C) $4.80
CTP-16 SHAFT PROTECTOR (D) $4.80
D10 Sharpener Support GC12/GC12D (Requires D10-A or D10-B) $29.40
D10-A Sharpener Support Sleeve GC12 (32mm) $8.60
D10-B Sharpener Support Sleeve GC12D (25mm) $8.60
D12 COVER RELEASE KNOB GC12D (7 3/4") $21.00
D12-U COVER RELEASE KNOB-UNDERSIZED GC12D (7 3/4") - OLD STYLE $88.80
D15 SLICER TABLE GC12D $158.00
D17 TABLE SUPPORT BRACKET GC12D $51.40
D26 INDEX KNOB GC12D $16.20
D27 INDEXING CAM GC12D $7.20
D35 Table Adjustment Assy GC12D $49.00
D38 MOTOR 1/2 HP GC12D (2") $238.00
D40 RUBBER FOOT (SET OF 4/BAG) NEW STYLE-SEE NOTE-GC10/12/12D $4.40
D41-A FOOT SCREW GC12D $1.20
D44 SLIDE BAR GC12D $12.40
D46-A CHUTE STUD GC12D $0.80
D47 CHUTE SLIDE ASSEMBLY GC12D $77.40
D50 SLIDE ROD (ROUND) GC12D $30.80
D52 DRIVE HUB ASSEMBLY GC12D $97.80
D52-A Microswitch Collar GC12D $13.20
D55 DRIVE BELT GC12D $18.80
D59-A KNIFE COVER INSERT GC12D *** OLD STYLE - HIGH HEX *** $2.80
D59-B KNIFE COVER INSERT GC12D *** NEW STYLE - LOW HEX *** $2.80
D61 KNIFE COVER GC12D $103.00
D64 END WEIGHT ASSEMBLY GC12D $110.00
D67 FOOD CHUTE GC12D $147.00
D67-A END WEIGHT ROD GC12D (11 1/8") $13.20
D70 CHUTE SUPPORT GC12D - Old 2 Holes $75.20
D70-1 CHUTE SUPPORT GC12D - New $77.00
D70-D CHUTE SUPPORT MOUNTING PLATE GC12D $7.40
D75 BOTTOM ENCLOSURE-METAL GC12D $39.40
D76 BOTTOM ENCLOSURE NUT GC12D $0.80
D86 BASE HOLE COVER GC12D $5.40
E001630 Rubber Platter Support GS30/GS30T $1.20
E002515 Foot Level GS30/GS30T
$1.20
E133100 Storage Battery GS30/GS30T $28.60
E19 AC POWER ADAPTER GPS15 $16.00
E23305205 Adjustable Foot GS130/130T $5.80
E248306 Harness - S3 - Display GS30 $32.00
E256809 Platter GS30/GS30T $34.60
E281800 Key GS30/GS30T $16.20
E333501 Power Cord GS30/GS30T $22.40