EasyManuals Logo

Globe SP20 User Manual

Globe SP20
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Page11
Operating Instructions
12. Pusheachbowlclampbackwardstounlockthebowlfromthebowlcradle.
13. Liftupslightlyonthebowlsoitclearsthepinsonthebowlcradle.
Most batches are heavy. Always use two people to remove and transport the loaded
bowl after mixing is complete. A bowl truck is included with the SP60, SP62P and
SP80PL models and should be used to unload bowls containing more than 50 lbs.
per batch.
HOW TO USE THE ATTACHMENT HUB
Never put your hand into the feed chute when using any mixer attachment.
ThemixermustbeOFFbeforeinstallingattachments!DoNOTuseattachmentswhilemixing!
1. Loosenandremovetheattachmenthubthumbscrew(seeg11-1).
2. Removetheplasticcoverfromtheattachmenthub(seeg11-1).
3. Lubricatetheattachmentshaftwithafoodqualitygreaseormineraloil.
4. Inserttheattachmentshaftintothehubmakingsuretolineupthealignmentpinwith
thehubhole.
5. Tightenthethumbscrewbackintothehubandsecurelytightenit.
6. Selecttheappropriatespeedsettingbyliftingorloweringthespeedcontrollever.
Recommended Speed while using attachments:
Attachment RecommendedSpeed
VegetableSlicer 1or2
CheeseShredder/Grater 2or3
MeatGrinder 1only
NOTE: Makesurethebowlisupandthebowlguardisclosed.Themixerwillnotstartifthebowlandthe
bowlguardarenotintheproperoperatingposition.
7. Turnthetimerknobinacounterclockwisedirectiontothegreen“on”position.
8. Pressthegreenstartbuttonlocatedonthemiddleofthecontrolpanel.
Always STOP the mixer BEFORE changing speeds! Failure to do so may damage the
gears or other parts and WILL void the warranty!
9. Tochangethespeedwhileusingmixerattachments:
a. presstheredstopbutton
b. changethespeedbyraisingorloweringthespeedcontrollever
c. pressthegreenstartbuttontorestartthemixer
NOTE: TheSP62PandSP80PLwillautomaticallyshutoffifthespeedsarechangedwhilethemixerisin
operation.
PlasticCover
Thumbscrew
g.11-1

Other manuals for Globe SP20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Globe SP20 and is the answer not in the manual?

Globe SP20 Specifications

General IconGeneral
ManufacturerGlobe
ModelSP20
CategoryMixer
Capacity20 quarts
Speeds3
Phase1
Frequency60 Hz
ColorGray
Voltage115 V
MaterialStainless Steel

Related product manuals