Glow-worm Climapro2RF - Main Screen Description; Button Functions; Screen on Standby

0020094585_01-08/10-Glow-worm
- 7 -
HOWTOUSEYOURCLIMAPRO
2
RF
6.4 Main screen
6.4.1 Description
1
2
3
7
6
5
4
Legend
1 Display area of the current operating
mode
2 Display area for messages
3 Day of the week
4 Current time
5 Current date
6 Room temperature*
7 Outside temperature as measured
by the outdoor sensor (if sensor is
connected)
(*) Please note: the room
temperature displayed on the
Climapro
2
RF may vary when
the thermostat is held in your
hand.
Climapro
2
RF takes
measurements optimally when
it is held in its wall support.
6.4.2 Button functions
Fromthemainscreen,itispossibleto:
Buttons Description
Tochangetheroomtemperature
iftheheatingprogramis
disabled.
Toaccesstheoverrideofan
activeprogram.
Toaccesstheoverridemenuif
multipleprogramsareactive(see
overridemenu).
Tounlockthekeypadbypressing
thebuttonfor3seconds.
Tocancelanoverride.
Toaccessthecanceloverride
menuifmorethanoneoverride
isactive(seeoverridemenu).
Toaccessthemainmenu.
6.4.3 Screen on standby
Theroomthermostatscreengoesinto
standbywhenthekeyboardisnotinuse
for1minute.Thescreendisplaysno
information.
Ifthelockfunctionisenabled,locking
takesplacewhentheroomthermostatis
onstandby(seekeypadlock).
• Pressakeyonthekeyboardtodisplay
themainscreen.