What to do if fault code reappears on Glow-worm Boiler?
If a fault code reappears on your Glow-worm Boiler even after multiple reset attempts, the suggested solution is to contact customer service for assistance.
How to troubleshoot fault codes (F.XX) on Glow-worm ENERGY 15r?
To address fault codes (F.XX) on your Glow-worm Boiler, refer to the table in the appendix for advice or use the check programme(s).
How to delete the fault memory on Glow-worm ENERGY 15r Boiler?
To delete the fault memory on your Glow-worm Boiler, use function d.94.
General| Model | ENERGY 15r |
|---|---|
| Category | Boiler |
| Type | Regular |
| Output | 15 kW |
| Mounting | Wall-mounted |
| Fuel Type | Natural Gas |
| Central Heating Max Power | 15 kW |
| Operating Pressure | 3 bar |
Classification of warnings based on severity.
Risks associated with unqualified personnel.
Specifies the product's intended application.
Broad safety advice and precautions including risks from gas and weight.
Instructions for safely moving the unit.
Required spacing around the product for installation.
Procedures for securely attaching the product to a wall.
Essential safety and preparatory steps before installation.
Steps for making the gas connection.
Safety and procedure for electrical connections.
Detailed instructions for electrical wiring.
Procedures for connecting the main power supply.
How to connect external controllers.
How to use and set diagnostic codes for configuration.
Procedure for initial product start-up by qualified personnel.
Procedures for checking and treating heating water quality.
Verifying and adjusting gas settings for optimal performance.
Verifying gas connection pressure.
Checking flue gas system for leaks and recirculation.
Measuring and adjusting the CO2 content.
Verifying leak-tightness of gas, heating, and hot water circuits.
Procedure for checking CO2 content.
How to adjust the CO2 content.
Verifying the product is leak-tight.
Guidance on identifying and fixing faults using codes.
Procedures for replacing various components.
Verifying the product's leak-tightness.
To Next Page