What to do if fault code reappears on Glow-worm Boiler?
If a fault code reappears on your Glow-worm Boiler even after multiple reset attempts, the suggested solution is to contact customer service for assistance.
How to troubleshoot fault codes (F.XX) on Glow-worm ENERGY 12r Boiler?
To address fault codes (F.XX) on your Glow-worm Boiler, refer to the table in the appendix for advice or use the check programme(s).
How to delete the fault memory on Glow-worm Boiler?
To delete the fault memory on your Glow-worm Boiler, use function d.94.
General| Boiler Type | Regular |
|---|---|
| Output | 12 kW |
| ErP Space Heating Efficiency Class | A |
| Fuel Type | Natural Gas |
| Mounting | Wall Mounted |
| Max Working Pressure | 3 bar |
| CH Output (kW) | 12 kW |
| Efficiency SAP 2009 (%) | 89 |
| NOx Emissions (mg/kWh) | 37 mg/kWh |
Classifies warnings by severity using symbols and signal words.
Defines product purpose and outlines general safety precautions and risks.
Covers electrical safety, electronics access, wiring, power supply, and controller connections.
How to access and interpret diagnostic and status codes for system operation.
Procedures for initial product start-up and verifying gas type and settings.
Steps for switching on the product and checking/adjusting gas settings.
Procedures for checking flue gas, CO2 content, and overall leak-tightness.
Overview of inspection and maintenance intervals and procuring spare parts.
Guides on identifying, rectifying, and managing fault codes and memory.
To Next Page