What to do if fault code reappears on Glow-worm Boiler?
If a fault code reappears on your Glow-worm Boiler even after multiple reset attempts, the suggested solution is to contact customer service for assistance.
How to troubleshoot fault codes (F.XX) on Glow-worm ENERGY 18r?
To address fault codes (F.XX) on your Glow-worm Boiler, refer to the table in the appendix for advice or use the check programme(s).
How to delete the fault memory on Glow-worm Boiler?
To delete the fault memory on your Glow-worm Boiler, use function d.94.
General| Model | ENERGY 18r |
|---|---|
| Category | Boiler |
| Type | Regular |
| Output | 18 kW |
| Efficiency | 89.3% |
| Warranty | 2 Years |
| Mounting | Wall-mounted |
| Efficiency SAP 2009 | 89.3% |
| ErP Space Heating Efficiency Class | B |
| Central Heating Flow Temperature Range | 30 - 80 °C |
| Flue Options | Horizontal or vertical |
| Electrical Supply | 230V |
Classification of warnings by severity of danger.
Risks associated with unqualified personnel performing tasks.
Overview of essential safety precautions and warnings.
Procedures to follow if gas is detected in the building.
Safety measures for preventing electrical shock.
Safety precautions and checks before starting installation.
How to access and use product diagnostic codes for adaptation.
Methods for viewing the product's current operating status.
Essential steps for the first start-up and commissioning.
Measuring and verifying the boiler's gas flow rate.
Verifying the gas inlet pressure at the test point.
Guidance for addressing fault codes and operational issues.
Accessing and reviewing the stored fault history.
Procedures for clearing stored fault codes.
Verifying the product's integrity against leaks.
Summary table of required inspection and maintenance tasks.
To Next Page