Supplied By www.heating spares.co Tel. 0161 620 6677
34
220692C
34
SECTION
Front Panel Assembly
8
3059
BOILER
MOUNTING WALL
FRONT
PANEL
TOP
MOUNTING
BRACKET
step
1
step
2
step
3
Note. The front panel assembly has
been designed with a variable
adjustment to suit a range of available
kitchen furniture, 700mm-728mm high
by 285mm-315mm deep and will also
suit installations in a cupboard.
It is delivered preset to 700mm high by
285mm deep.
Measure the height of the cupboard or
compartment, “H”.
Adjust the front panel height “H” as
necessary.
Measure the depth of the cupboard or
compartment, “D”.
Adjust the front panel top mounting
bracket as necessary.
Slide the right hand side cover plate
(supplied in the fittings pack) into
position.
D = 285 to 315mm
H = 700 to 728mm
W = 470mm
TOP HOLE FIXING
700 to 714mm
H
BOTTOM HOLE FIXING
714 to 728mm
W
H
D
'MINUS' 1mm
ADJUSTMENT
SCREW
To Next Page
Loading...
