GLUX VSP-F2L4 User Manual

1
The Manual of VSP-F2L4 Controller
Contents
Chapter 1 Brief Introduction of VSP-F2L4 Controller................................................................... 2
1.1 Parameters of VSP-F2L4 controller..............................................................................................2
1.2 The signal connection way of LED screen................................................................................... 3
1.3 Function Introduction for VSP-F2L4 Controller’s Buttons and Interfaces..................................5
1.3.1 Front Side Introduction of the VSP-F2L4 Controller........................................................5
1.3.2 Introduction for Back Side of the VSP-F2L4 Controller.................................................. 6
Chapter2 Key-press operation of VSP-F2L4 controller...................................................................7
2.1. Use the buttons to switch input signal types................................................................................7
2.2 Adjust the Parameters by Key-press............................................................................................. 7
2.2.1 Product............................................................................................................................... 8
2.2.2 Spec (Adjust and set the parameters of LED screen)........................................................8
2.2.3 Address Setting.................................................................................................................. 9
2.2.4 Color Test......................................................................................................................... 10
2.2.5 IP Address.........................................................................................................................11
2.2.6 Language (Language Select)............................................................................................11
2.2.7 Date Save..........................................................................................................................11
Chapter3. Control software of VSP-F2L4 controller.....................................................................12
3.1Installation and Running Environment for Control Software of VSP-F2L4 Controller.............12
3.2 Communication Setting.............................................................................................................. 13
3.2.1 Serial Port (COM Port) Setting through USB Cable.......................................................13
3.2.2 Network Port Setting........................................................................................................14
3.3 Parameters Introduction of Control Software.............................................................................15
3.4 Address Setting........................................................................................................................... 17
3.4.1. Address setting method 1: (Not normally used)............................................................. 17
3.4.2 The Method 2 for Address Setting: Multiple Setting (whole screen setting）...............19
3.4.3 The method 3 for Address setting: Intelligent Settings................................................... 20
3.5 Color temperature adjustment.....................................................................................................22
3.5.1 Single panel (Box) color temperature adjustment...........................................................23
3.5.2 LED board (module) color temperature adjustment........................................................25
3.6 Manufacturer Set.........................................................................................................................26
Appendix 1 Signal output cutting method of VSD-F2L4 controller (Important).........................27
Signal Horizontal Segmentation of VSP-F2L4 controller................................................................27
(Applicable to all products).............................................................................................................. 27
Signal Vertical Segmentation of VSP-F2L4 Controller....................................................................28
Appendix Ⅱ Failure Analysis and Troubleshooting....................................................................29

GLUX VSP-F2L4 Specifications

General

Brand	GLUX
Model	VSP-F2L4
Category	Controller
Language	English

Summary

Chapter 1 Brief Introduction of VSP-F2L4 Controller

1.1 Parameters of VSP-F2L4 Controller

Details the technical specifications of the VSP-F2L4 controller, including resolution, power, and connectivity.

1.2 Signal Connections to the LED Screen

Explains the different methods for connecting the VSP-F2L4 controller to an LED screen.

1.3 Function Introduction for VSP-F2L4 Controller's Buttons and Interfaces

Describes the buttons and interfaces on the front and back of the VSP-F2L4 controller.

Chapter 2 Key-press Operation of VSP-F2L4 Controller

2.1 Switch Input Signal Types

Guide on using buttons to switch between different input signal types for the controller.

2.2 Adjust Parameters by Key-press

Instructions on navigating menus and adjusting controller parameters using physical buttons.

2.2.1 Product Settings

How to select and configure product-specific parameters like port, series, and signal test modes.

2.2.2 Spec (Adjust LED Screen Parameters)

Details adjusting LED screen parameters such as brightness, X/Y start, and zoom.

2.2.3 Address Setting

Explains how to set the display address for LED panels connected to the controller.

2.2.4 Color Test

Describes how to perform color tests and adjust RGB values for the LED screen.

2.2.5 IP Address Configuration

Guide to setting the controller's IP address for network communication.

2.2.6 Language Selection

How to select the display language for the controller interface.

2.2.7 Data Save

Instructions on saving configured parameters to prevent data loss upon reboot.

Chapter 3 Control Software for VSP-F2L4 Controller

3.1 Installation and Running Environment

Details the system requirements and initial setup for the VSP-F2L4 control software.

3.2 Communication Setting

Explains how to establish communication between the control computer and the VSP-F2L4 controller.

3.2.1 Serial Port (COM Port) Setting via USB

Step-by-step guide for setting up communication using a USB cable and COM port.

3.2.2 Network Port Setting

Instructions for configuring network communication using an Ethernet cable and IP addresses.

3.3 Parameters Introduction of Control Software

Overview of the various parameters available within the control software interface.

3.4 Address Setting

Guide to configuring the display address for LED panels using the software.

3.4.1 Address Setting Method 1 (Not Normally Used)

Describes the single-panel address setting method, noting its limited typical use.

3.4.2 Address Setting Method 2 (Multiple Setting)

Explains the whole-screen address setting method for simultaneous configuration.

3.4.3 Address Setting Method 3 (Intelligent Settings)

Details the flexible intelligent settings method for address configuration, suitable for complex layouts.

3.5 Color Temperature Adjustment

Instructions for adjusting the color temperature and brightness of LED panels.

3.5.1 Single Panel (Box) Color Temperature

Specific steps to adjust color temperature for a single LED panel or box.

3.5.2 LED Board (Module) Color Temperature

Steps for adjusting color temperature for individual LED boards or modules within a panel.

3.6 Manufacturer Set

Information about the manufacturer-specific settings, not typically used by end-users.

Appendix 1 Signal Output Cutting Method

Signal Horizontal Segmentation

Explains how to divide the video signal into four horizontal parts for output.

Signal Vertical Segmentation

Describes how to segment the video signal into vertical parts for controller output.

Appendix II Failure Analysis and Troubleshooting