Gmate WHeeL System - Page 8

Obtaining Blood Drop
Insert a new sterile lancet into the lancet
holder.
Twist the lancet cap off.
STEP 3
STEP 4
Hold the lance holder firmly, and pull back
and release the sliding barrel. Now the
lancing device is cocked.
Put the lancing device cap on and close by
turning clockwise.
STEP 5
STEP 6
14
Obtaining Blood Drop
STEP 7
STEP 8
Set the lancing depth by rotating the cap.
1-2 for soft or thin skin, 3 for average skin,
4-5 for thick or calloused skin.
Place the lancing device on finger tip.
While lancing device rest on the finger.
(The harder it is pressed, the deeper the
lance), press the release button to lance.
15
Caution : To avoid the infection possibility:
Make sure to wash the lance position with soap and water
before sampling.
Do not share a lancet or lancing device with others together.
Always use a new lancet - lancets are for single use only.
Keep your meter and lancing device clean.