Infotainment System 89
Using Voice Recognition
1. Press and release the
w SRC x steering wheel
control button. The audio system
mutes, and a beep is heard.
A voice prompt stating, “Please
start speaking after the beep”
might be heard.
If there is no beep, make sure
that the voice volume setting is
not turned down. See Using the
Navigation System on page 50
for more information.
While voice recognition is
active, the system displays
a
g symbol.
2. Clearly speak one of the
commands listed later in this
section.
Canceling Voice Recognition
1. Press and release the $ / c
steering wheel control button to
cancel a command, or if the
system response does not
match the verbal command.
2. The system replies, “Voice
recognition canceled.”
Pressing any other radio or
steering wheel control, other
than the volume knob or the
volume steering wheel control
button cancels the session.
3. Press and release
w SRC x
steering wheel control button to
restart the voice recognition
session.
Helpful Hints for Speaking
Commands
.
When a multiple command is
available, choose the command
that best works for you.
.
Words that are in brackets are
optional. For example, the
command “Radio [band] FM,”
saying “Radio FM” or “Radio
Band FM” are both valid
commands.
.
Words that are separated by
a ( / ) mean there is a choice of
using a word on either side of
the slash. For example, the
command (CD/DVD/Disc) [help],
you can say “CD [help]” or
“DVD [help]” or “Disc [help].”
.
When the system recognizes the
command, the system will either
perform the function or ask to
confirm the choice by clearly
saying “yes” or “no.”
To Next Page
Loading...
