Infotainment System 91
Voice Recognition Commands
The following list shows the voice
commands available for the
navigation system with a brief
description of each. The commands
are listed with the optional words
in brackets. To use the voice
commands, see the instruction
listed previously.
Display Commands
Display [set] day [mode],
display [select] day [mode]:
Instructs the system to switch the
display to day mode.
Display [set] night [mode],
display [select] night [mode]:
Instructs the system to switch the
display to night mode.
Display [set] auto [mode],
display [select] auto [mode]:
Instructs the system to switch the
display to auto mode.
Display [help]: Instructs the
system to play back helpful advice
about display commands, and some
common display commands which
are available to adjust the display
setting.
Radio Commands
Radio AM, radio [band] AM, radio
FM, radio [band] FM, radio XM
(if equipped), radio [band] XM
(if equipped): Instructs the
system to go to either the AM, FM,
or XM (if equipped) radio bands.
Radio select [frequency] AM,
radio select [frequency] FM:
Instructs the system to go to a
specific frequency on either the AM
or FM band. For example, radio
select ninety seven point one FM or
radio select ten forty AM.
Radio select [channel] XM
(if equipped): Instructs the system
to go to a specific channel on the
XM™ band (if equipped). For
example, radio select one fifty
one XM.
Radio [help]: Instructs the system
to play back some helpful advice
about radio commands, and some
common radio commands which are
available to the user.
CD/DVD/Disc Commands
The following commands are only
available when a CD, MP3, or DVD
is loaded.
Radio CD, radio DVD, radio
Disc: Instructs the system to go to
Disc mode.
Radio CD select (track number),
radio DVD select (track number),
radio disc select (track number):
Instructs the system to play
a specific track on the Disc.
For example, radio disc select ten.
This command supports up to
254 tracks.
CD [help], DVD [help],
disc [help]: Instructs the system to
play back helpful advice about disc
commands, and some common disc
commands which are available.
To Next Page
Loading...
