GMC Yukon 2025 - Page 90

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-17942154) - 2025
Seats and Restraints 89
If the child restraint or vehicle seat position
d
o
es not have the LATCH system, you will be
using the seat belt to secure the child restraint.
Be sure to follow the instructions that came
with the child restraint.
If more than one child restraint needs to be
installed in the rear seat, be sure to read Where
to Put the Restraint 379.
1. Put the child restraint on the seat.
2. Pick up the latch plate and run the lap
and shoulder portions of the vehicle seat
belt through or around the child restraint.
Ensure the seat belt webbing is routed as
directly as possible and is not caught on seat
handles or plastic trim. The child restraint
instructions will show you how.
3. Push the latch plate into the buckle until
it clicks.
Position the release pushbutton on the
buckle, away from the child restraint,
so that the seat belt could be quickly
unbuckled if necessary.
4. Pull the shoulder belt all the way out of the
retractor to set the lock. When the retractor
lock is set, the belt can be tightened but not
pulled out of the retractor.