MODES OF OPERATION
19
6. The test can be aborted at any time by pressing
B1.
7. The result of ‘Barhole number 01’ is displayed on
completion. At this point, the instrument must be
purged, press
B1.
To view the results of other barhole tests, press
B2
and B3 to move through the results.
8. The next barhole number will be displayed.
Repeat steps 5 -7 to test ‘Barhole number 02’.
9. If you wish to repeat (overwrite) a barhole test, e.g. at
No. 1, press
B3 until ‘Barhole number 01’ is displayed.
Press
B1 to test ‘Barhole number 01’ again.
10. Press
B1 to con rm and overwrite ‘Barhole number
01’.
Press
B4 to reject and return to the previous display.
11. Press
B4 to exit barhole testing.
To Next Page
Loading...