GMI GS700 - Pipeline Gas Test

MODES OF OPERATION
23
Pipeline Gas Test
The pipeline gas test is used to discriminate between pipeline gas (natural gas) and non pipeline
gas (e.g. land ll or swamp gas).
i
The pipeline gas test, when con gured, can run in the background of ALL modes of
operation, except for CSM.
When sample testing, the GS700 discriminates the gas and displays the results as:
NOT Pipeline Gas!
• Non Pipeline gas identi ed
• Red visual top plate LED’s activated
Pipeline Gas
• Pipeline gas identi ed
The live result will be displayed until the gas reading drops below the decision point (approximately
1.5% GAS).
i
The GS700 can be con gured to display only the ‘NOT Pipeline Gas!’ results.