Need help?Do you have a question about the GMI GS700 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Operating Temperature | -20°C to +50°C |
| Measurement Range (CO) | 0-1000 ppm |
| Measurement Range (CH4) | 0-100% LEL |
| Resolution (O2) | 0.1% Vol |
| Resolution (CO) | 1 ppm |
| Resolution (CH4) | 1% LEL |
| Weight | 220g |
| Gases Detected | O2, CO, H2S, CH4 |
| Sensor Type | Electrochemical (O2, CO, H2S), Catalytic (CH4) |
| Alarms | Audible, Visual, Vibrating |
General safety guidelines for operating the instrument.
Specifies conditions and environments where the instrument can be used.
Details of the GLO mode, including features and pump control.
Operating mode for detecting gas leaks indoors.
Mode for safety monitoring in confined spaces, including features and readings.
Test to discriminate between pipeline gas and non-pipeline gas.
How to acknowledge and clear instrument alarms.
Details the different types of gas alarms (Hi/HiHi, Lo/LoLo).
Explains Time Weighted Average (TWA), STEL, and LTEL alarms.
Describes the alarm triggered when gas concentration exceeds the instrument's range.
Types of fault alarms, including Sample Fault and Zero Fault.
Step-by-step guide to replacing alkaline batteries.
Procedure for recharging the instrument's lithium-ion battery pack.
Steps for removing and replacing the instrument's battery pack.
Replacing hydrophobic and particulate filters in the probe handle.
To Next Page
