Page 33
General Machine Products (KT), LLC
Airstream Compressor
P/N 89011
The Air Compressor is designed specifically for use with our Micro
Fiber Cable Blowing Machines. This reliable & efficient screw
compressor, powered by a gasoline engine, provides a maximum
working pressure of 220 psi (15 bar) with 35.3cfm (1000 litres/m)
flow.
The compressor is modified to include an after-cooler and water
separator. The output air is filtered and conditioned to optimize the
performance of our micro fiber cable blowing machines. The com-
pressor package includes a 50 foot 3/4" diameter air hose for connection
to the microfiber cable blowing machine.
Micro Cable Fleeter
P/N 89002
The Micro Cable Fleeter re-
places the manual method of
“figure eighting” cable, and
provides protection and se-
curity for the cable.
It has a nominal capacity to
store 6500 ft. (2000 meters)
of 8.5mm diameter cable.
14.0 BLOWING ACCESSORIES
Engine: Honda 21 hp Width: 31" (800mm)
Fuel Cap.: 5 gal (20 liters) Height: 30" (780mm)
Length: 42" (1070mm) Weight: 487 lbs. (2221kg)
Mini Cable Fleeter
P/N 89298
The Mini Cable Fleeter re-
places the manual method
of “figure eighting” cable,
and provides protection and
security for the cable.
It has a nominal capacity to
store 6500 ft. (2000 meters)
of 11mm diameter cable.
Innerduct Pressurization
Test Kit
P/N 89641
The Innerduct Pressurization test
kit is used to test the integrity of
the duct before the cable is blown
in.
Polywater®
Prelube 2000™
P/N 89141
Polywater® Prelube
2000™ reduces fric-
tional drag during the
blowing of outside
plant cable into duct.
Polywater®
Prelube 5000™
P/N 89199
Polywater® Prelube
5000™ reduces fric-
tional drag during the
blowing of small diam-
eter fiber optic micro-
cable into microtube
duct.
To Next Page
Loading...