1010 1111
Adapter cable for Gemini flex 11 kW*:
• to CEE 32 A red
• to CEE 16 A blue (camping plug)
• to 16 A multiple domestic plugs
Adapter cable for Gemini flex 22 kW*:
• to CEE 16 A red
• to CEE 16 A blue (camping plug)
• to 16 A multiple domestic plugs
16/32 A CEE red plug
(Gemini flex 11/22 kW)
Connection to red CEE socket or original go-e adapter
RFID chip
Release of charging processes (can be activated via app)
Reset card
Required for using the app and for resetting the charger to
factory settings
RFID reader
Release of charging processes with RFID chips or cards
(can be activated via app)
Button
Change of charging strength (5 levels - adjustable via app)
LED ring
Display of charging strength (1 LED = 1 ampere) and char-
ging status
Rating plate
With serial number of the charger
Sealed screws
Opening leads to loss of guaranty/warranty
Type 2 socket
Connection for type 2 plug of the charging cable
(with weather protection)
Back
i
j
c
d
e
g
f
h
i
j
a
b
d
e
f
g
h
c
a
b
11 or 22 kW charging box
with 16 A or 32 A CEE red plug
Wall bracket
Mounting material
5x Dowel 8 x 40 mm
4x Screws for wall bracket 4.5 x 50 mm
1x Screw for U-piece 4 x 50 mm
1x U-piece (optional anti-theft device)
• go-e Controller
• go-e Case
• Type 2 cable (up to 22 kW) 2.5 m | 5 m | 7.5 m
• Type 2 cable holder
• RFID chips, pack of 10
• Additional go-e Charger wall bracket
RFID chip
Reset card
4x 1x5x 1x
Optional accessories
*Due to legal requirements, all adapter cables may not be used
in Switzerland.
Housing
Impact-resistant and UV-resistant high-performance plastic
Installation and operating manual go-e Charger Gemini ex V 1.4Installation and operating manual go-e Charger Gemini ex V 1.4
5. Product overview 6. Scope of delivery
To Next Page
Loading...
