go-e Gemini flex - Installation; Installation Tools and Materials

2828 2929
b
f
The „Charging“ tab of the go-e Charger app gives you
direct access to the most important functions for
starting, stopping and monitoring charging proces-
ses.
Do you have several go-e Chargers? Tap the picture
of the Charger or its name to go to the selection page
with the list of available devices. Select the Charger
you want to operate.
Tap the „+“ icon at the top right to connect a new or
existing go-e Charger to the app.
Use the 3 tabs to switch between the screens „ Pow-
er“, „Details“ and „Data“.
The tab „Power“ shows the current charging power
in the large circle (if charging is in progress). You can
start and stop the charging process by tapping this
circle. In this case, you are charging in standard char-
ging mode, which does not take into account e. g. e-
xible energy taris.
Use the 3 round icons below to access the settings for
„Mode“, „Current“ and „Planned charge“.
You are also able to change the charging current du-
ring the charging process via the „Current“ icon, even
in steps of 1 ampere using the slider.
Under the headings „Status“, „Energy“ and „Informa-
tion“ you will nd further details regarding the char-
ging process.
If you tap „Energy per user“, a list with the charged
electricity quantities of all learned RFID chips is di-
splayed. You can also download the charging history
or meter readings here.
Use the 3 tabs to switch between the screens „Char-
ging“, „Settings“ and „Internet“.
a
c
d
e
b
a
c
d
e
f
12. App - charging 12. App - settings
You can adjust the basic and comfort settings of the
charger via the „Settings“ tab of the app. You are pro-
vided with help notes in the app for the setting opti-
ons, which is why you will only nd basic information
below.
Current levels
When delivered, the black button of the go-e Charger
is predened with 5 amperage levels for selecting the
charging current. You can switch between the levels
step by step by pressing the button. You are able to
adjust the current intensity of the ve levels to your
personal needs via the „Current levels“ setting option
of the go-e Charger app.
With lower amperages, you charge more sustainably,
which can have a positive eect on the stability of
the power grid. With high amperages, you charge the
battery faster.
Save energy with kWh limit
The „kWh Limit“ function is practical if you do not
want to fully charge the battery because, for exam-
ple, you live on a mountain and want to recuperate
when driving downhill. Set in the „kWh Limit“ menu
how much energy should be charged until the next
trip.
Flexible energy taris - charge cheaper
If you have a contract with your electricity provider
about a exible electricity tari with changing taris
every hour or at certain times of a day, you can con-
gure the Charger so that it charges your car at the
cheapest hours. To do this, we have integrated exib-
le energy taris in the app to provide you with a sus-
tainable and money-saving way of charging. The list
of energy providers you can see in the go-e Charger
app is constantly expanding, as dynamic electricity
pricing is a relatively new concept. Check in the go-e
app under „Mode“ whether your energy tari is al-
Installation and operating manual go-e Charger Gemini ex V 1.4Installation and operating manual go-e Charger Gemini ex V 1.4