go-e Gemini flex - Connection, Plug, and Adapter Safety; Maintenance and Repair Safety

1414 1515
Enclosed mounting material
It is not necessary to open the go-e Charger as part of the installation process.
The device must also never be opened in other respects.
Connection to infrastructure
Gemini ex 11 kW Gemini ex 22 kW
CEE red 16 A (3-phase) CEE red 32 A (3-phase)
With original go-e adapters (not included in the scope of delivery, available as accessories)*:
to CEE red 32 A
(three-phase - limitation by charging station to 16 A)
to CEE red 16 A
(three-phase)
to CEE blue 16 A (single-phase) to CEE blue 16 A (single-phase)
to multiple domestic plugs 16 A
(domestic socket - single-phase)
to multiple domestic plugs 16 A
(domestic socket - single-phase)
go-e Charger app and connectivity
Gemini 11 ex kW Gemini ex 22 kW
Local (WiFi hotspot) or worlwide* (WiFI) controlling and monitoring
Adjustment/check of the charge (voltage, current, power, energy)
Adjusting the current level in 1 ampere steps
Start/stop function and Scheduler
Management of RFID chips/cards (up to 10 users per charger) / Access control (RFID/App)
OCPP 1.6*
Electricity meter (total kWh and total amount per RFID chip)
kWh limit mode / ECO mode* / Next Trip Mode*
Push notications*
Cable unlock functions
Flexible energy tarifs with intelligent charging management*/**
Static load balancing*
Photovoltaic connection via go-e Controller (separate product) or
open API interface (programming required)*
LED adjustment
Management of the charging levels via button on the charging station
Updateable for later functions (Smart home, etc.)*
Automatic unlocking of the charging cable in the event of a power failure
1-/3-phase switching via app - even during the charging process
Synchronisation of charging processes with the cloud and display of the past charging processes*
Documented public API interfaces: HTTP , MQTT, Modbus TCP
*Internet connection of the Charger required
**Contract with an electricity provider whose exible electricity tari is integrated in the go-e app is required. Several 100 taris are
stored. The number of taris is constantly being expanded.
*Due to legal regulations, all adapter cables must not be used in Switzerland.
7. Technical data 8. Installation
Required tools
a c
e
b d
f
4X5X 1X
i k mj
l
Pencil
Spirit level
Measuring tape
Drilling machine
Screwdriver
Hammer
a
c
d
e
f
b
Dowel 8 x 40 mm
Screws for wall bracket 4.5 x 50 mm
Screw for U-piece 4 x 50 mm
U-piece (optional anti-theft device)
Wall bracket
i
k
l
m
j
Installation and operating manual go-e Charger Gemini ex V 1.4Installation and operating manual go-e Charger Gemini ex V 1.4