3131
Load balancing
If you operate several go-e Chargers at one
power connection, you should use the „load
balancing“ (static) function so that the building
power connection is not overloaded. A cloud
connection (WiFi) is required for this function. If
the cloud connection is temporarily interrupted,
the go-e Charger will continue charging with re-
duced charging current in fallback mode, pro-
vided a charging current value greater than 0 A
has been entered for this purpose.
12. App - settings
Scheduler
The „Scheduler“ option allows you to postpone
the charging process to a time when electricity
is available in abundance (often at night). In this
way, you act in a particularly sustainable way,
as you do not increase the load peaks that are
common at the end of the working day and take
electricity that could otherwise not be used sen-
sibly. In this way, you ensure grid stability.
After activating the scheduler, you can dene
when the go-e Charger may charge or not char-
ge. For weekdays, Saturday and Sunday, 2 time
periods can be dened separately.
Cable unlock functions
The default setting under „Cable unlock“ is that
the charging cable should remain locked in the
charger after the charging process until it is re-
leased at the vehicle (theft protection). Alternati-
vely, you can lock the cable permanently. This is
useful if you rarely take it with you in the car and
the go-e Charger has been installed outdoors.
The function serves as a permanent protection
against theft of the cable. Furthermore, you can
have the cable automatically unlocked after
the charging process. This is convenient if you
share the charging station with several people
and want to allow them to use the charger at
the end of your charging session.
To Next Page
Loading...
Need help?
General
