77
4. Safety regulations/notes
The go-e Charger may only be used for
charging battery electric vehicles (BEV)
and plug-in hybrids (PHEV) with the ad-
apters and cables intended for this pur-
pose.
Disregarding the safety regulations can
have serious consequences. go-e GmbH
declines any liability for damage caused
by disregarding the operating instruc-
tions, safety regulations or warnings on
the unit.
High voltage - danger to life! Never use
the go-e Charger if the housing is dama-
ged or open.
In case of unusual heat development, do
not touch the go-e Charger or the char-
ging cable and stop the charging process
as soon as possible. If the plastic is disco-
loured or deformed, contact customer
support.
Never cover the go-e Charger during
charging. Heat build-up can lead to re.
Persons wearing electronic implants
should keep at least 60 cm away from
the go-e Charger due to electromagnetic
elds.
Due to legal regulations the go-e Char-
ger Gemini must not be used in the
following countries: Sweden, Denmark,
Netherlands, France, Italy and United
Kingdom.
The go-e Charger Gemini has the com-
munication interfaces WiFi 802.11b/g/n
2.4GHz and RFID. WiFi is operated on a
frequency of 2.4Ghz, channels 1-13 with
the frequency band 2412-2472Mhz. The
maximum transmission power of the
WiFi is 20dBm. RFID is operated on a
frequency of 13.56MHz with a maximum
radiated power of 60dBμA/m at 10m.
Any information regarding electrical in-
stallation is intended exclusively for a
qualied electrician whose training all-
ows all electrical work to be carried out
in accordance with the applicable natio-
nal regulations.
Before carrying out electrical connec-
tion work, you need to de-energise the
circuit.
Installation must be carried out in accor-
dance with local, regional and national
regulations.
General safety regulations
Electrical protective measures, installation, operation
To Next Page
Loading...
