Go Power GP-PWM-10-FM User Manual

GP-PWM-10-FM
17
© 2018 Go Power!
7.6 Errors
Over Voltage
If the GP-PWM-
10-FM
experiences a
battery over
voltage (15.5V),
the controller will
stop operating,
and the display
will begin to flash
with all icons. The
controller will
resume operating
when the error is
cleared.
Icons Displayed: All symbols
Low Voltage
If the battery
voltage reaches
11 volts, the
battery SOC
symbol will show
the text “LOW”
beneath it. The
controller will
continue
operating in this
condition and will
only stop
operating if the
voltage drops
below 9 volts.
Icons Displayed: Battery SOC Symbol, LOW

Go Power GP-PWM-10-FM Specifications

General

Brand	Go Power
Model	GP-PWM-10-FM
Category	Controller
Language	English