Go Power GP-PWM-10-FM User Manual

GP-PWM-10-FM
2
© 2018 Go Power!
Contents
1.0 Installation Overview 3
1.1 Introduction 3
1.2 System Voltage and Current 3
1.3 Battery Type 3
1.4 Low Voltage Disconnect Function (USB Port) 4
1.5 Regulatory Information 4
1.6 Specifications 4
2.0 IMPORTANT SAFETY INSTRUCTIONS 5
3.0 Tools and Materials Needed 8
4.0 Choosing a Location 8
5.0 Installation Instructions 9
6.0 Wiring Diagram 12
7.0 Operating Instructions 13
7.1 Power Up 13
7.2 Setting the Battery Charging Profile 13
7.3 Battery Charging Profile Chart 14
7.4 Viewing the Controller Display Information 14
7.5 Resetting the ampere hours charged 16
7.6 Errors 17
8.0 Display Symbols 18
9.0 USB Charging 19
10.0 Frequently Asked Questions (FAQs) 19
11.0 Troubleshooting Problems 21
11.1 Problems with the Display 21
11.2 Problems with Voltage 22
11.3 Problems with Current 23
12.0 Limited Warranty 26
12.1 Repair and Return Information 26
13.0 Installation Template 26

Go Power GP-PWM-10-FM Specifications

General

Brand	Go Power
Model	GP-PWM-10-FM
Category	Controller
Language	English