Go Power GP-PWM-30-SB User Manual

GP-PWM-30-SB
16
© 2019 Go Power!
7.5 Resetting the ampere hours charged
To reset the count of ampere hours charged, toggle to the ampere hours
charged. Press and hold the A Button for 6 seconds to reset the counter
to zero.
7.6 Errors
Over Voltage
If the GP-PWM-30-SB experiences a battery over voltage (15.5V), the
controller will stop operating, and the display will begin to flash with all
icons. The controller will resume operating when the error is cleared.
Icons Displayed: All symbols

Go Power GP-PWM-30-SB Specifications

General

Brand	Go Power
Model	GP-PWM-30-SB
Category	Controller
Language	English