Go Power GP-PWM-30-SB User Manual

GP-PWM-30-SB
2
© 2019 Go Power!
Contents
1.0 Installation Overview 3
1.1 Introduction 3
1.2 System Voltage and Current 3
1.3 Battery Type 3
1.4 Low Voltage Disconnect Function (USB Port) 4
1.5 Regulatory Information 4
1.6 Specifications 4
2.0 IMPORTANT SAFETY INSTRUCTIONS 6
3.0 Tools and Materials Needed 7
4.0 Choosing a Location 7
5.0 Installation Instructions 7
6.0 Wiring Diagram 10
7.0 Operating Instructions 11
7.1 Power Up 11
7.2 Setting the Battery Charging Profile 12
7.3 Battery Charging Profile Chart 12
7.4 Viewing the Controller Display Information 13
7.5 Resetting the ampere hours charged 16
7.6 Errors 16
8.0 Display Symbols 17
9.0 USB Charging 19
10.0 Frequently Asked Questions (FAQs) 19
11.0 Troubleshooting Problems 21
11.1 Problems with the Display 21
11.2 Problems with Voltage 22
11.3 Problems with Current 23
12.0 Limited Warranty 25
12.1 Repair and Return Information 25
13.0 Installation Template 25

Go Power GP-PWM-30-SB Specifications

General

Brand	Go Power
Model	GP-PWM-30-SB
Category	Controller
Language	English