6
AnTI FOg InSERTS DEPARTMEnT
Camera has a an fog inserts department to oponally insert an an fog
insert (a desiccant strip) to absorb/adsorb, moisture and extract water va-
por from within the camera especially from lens. If you detect condensed
water / fog in the lens, you can replace the insert (desiccant strip) in the
an fog inserts department.
For further detail see An Fog Inserts user guide supplement.
Please visit for purchasing an fog inserts.
MOUnTIng YOUR CAMERA
Mount your camera using the Flat surface mount, Goggle mount or the
Universal mount:
When you are downhill skiing, snowboarding or motocrossing, you can
mount the camera on a goggle strap (min. 40 mm / 1.57 inch
max. 45 mm / 1.77 inch):
push
place back
pull out
goggle strap
To Next Page
Loading...