7
You can mount the camera to the top or side of your helmet, or directly
onto your motorcycle or race car. For best results make sure to clean the
surface of your gear (e.g. your helmet) with the alcohol pad, and mount
at room temperature. If possible, aach the mount to your gear 12 hours
before use. You can easily rotate the posion of your camera by unfasten-
ing the mounng screw with the edge of a coin.
You can mount the camera using any third party mount e.g. a tripod,
telescope arm or RAM mounts supporng a 1/4” diameter, 20 threads per
inch (1/4-20) screw.
MOUnT RAILS
Once the mount is xed, slide the camera on the mount rails unl
completely forward:
mount rails
camera rails
Please visit for purchasing further
mounts, e.g. handle bar mount, roll bar mount, board mount, etc.
BEFORE USING THE CAMERA WITH ANY MOUNT IN YOUR ACTIVITIES,
DETERMINE IF THE HOLDING POWER OF THE MOUNT IS APPROPRIATE
AND SAFE. THE CAMERA COULD CAUSE INJURY OR HARM IN THE EVENT
THAT IT COMES LOOSE FROM THE MOUNT. GOBANDIT DOES NOT
WARRANTEE LOST OR DAMAGED CAMERAS.
To Next Page
Loading...