8
SAFETY LEASH
You can addionally use the Safety leash to secure the camera, in case it
comes loose from the mount.
safety leash
· Unclip leash
· Loop one end of leash through side hole of camera, then out the back
· Aach other end of leash to e.g. the handle bar
· Clip leash together
DO NOT ATTACH THE LEASH TO THE CAMERA WHEN THE CAMERA IS
MOUNTED ON HELMET OR GOGGLES, WHEN THE CAMERA WILL BE
USED IN HIGH WINDS OR AT HIGH VELOCITIES OR IN ANY OTHER
CIRCUMSTANCES WHERE BY THE CAMERA COULD CAUSE INJURY OR HARM
IN THE EVENT THAT IT COMES LOOSE FORM THE MOUNT AND REMAINS
TETHERED BY THE LEASH. BY ATTACHING THE LEASH YOU AGREE TO WAVE
ANY CLAIMS AGAINST GOBANDIT GMBH AND ANY OF ITS AFFILIATES,
AGENTS, EMPLOYEES, OFFICERS OR DIRECTORS ARISING FROM THE USE OF
THE LEASH.
LEnS ALIgnMEnT
The front lens of the camera is designed for opcal rotaon (90° to the
right and 90° to the le).
Align the opcs to capture a level landscape image even if the camera is
not mounted level. Adjusts vercally or horizontally.
To Next Page
Loading...